Flywheel Re surfacing

[Jake Raby]

In my experience by the time a DMF unit needs to be resurfaced its very near maximum deflection of the two masses and should be replaced anyway. Kinda like putting lipstick on a pig to resurface one.

[Alien]

Thanks for all your comments. Jake, You have a good point, however I'm on budget and would be doing the work myself

[Gilles]

Originally Posted by Jake Raby

In my experience by the time a DMF unit needs to be resurfaced its very near maximum deflection of the two masses and should be replaced anyway. Kinda like putting lipstick on a pig to resurface one.

Jake,

Would you recommend re-surfacing and then balancing a 'New" DMFW..?

This is to remove some of the inertial weight (not quite like a LWFW), but end up with a lighter than a standard dual mass flywheel.

Your comments are always appreciated, thank you.

.