Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 02-12-2014, 03:25 PM   #1
Registered User
 
truegearhead's Avatar
 
Join Date: Jul 2011
Location: Richmond, VA (The Fan)
Posts: 978
Yet another tire size question...

I'm sure this has been covered, and I've seen at least one page suggesting they'll fit but I'm skeptical. Will 275/40ZR17 rear tires and 255/40/ZR17 fronts fit on stock rims?

Here's the site I found that said, yes they'll fit but that seems like a huge bump.
Boxster Tires and Wheels

__________________
1997 Boxster 4.2L Audi V8 Bi-Turbo
2003 911 C2
NASA HPDE Instructor
truegearhead is offline   Reply With Quote
Old 02-12-2014, 03:40 PM   #2
Registered User
 
LAP1DOUG's Avatar
 
Join Date: Aug 2011
Location: USA
Posts: 414
Quote:
Originally Posted by truegearhead View Post
I'm sure this has been covered, and I've seen at least one page suggesting they'll fit but I'm skeptical. Will 275/40ZR17 rear tires and 255/40/ZR17 fronts fit on stock rims?

Here's the site I found that said, yes they'll fit but that seems like a huge bump.
Boxster Tires and Wheels
I have run 255 x 18's in front with a Dunlop Z1, and 285 x 18's in rear with a Hoosier A6 (obviously not at the same time). However, on stock wheel width's, I would expect a 255 and a 275 would be beyond the tire manufacturer's recommended width, so the tire profile would not be ideal.

Take a look at the recommended wheel widths in the specifications tables on tirerack.com. In my experience you don't want to go much beyond the tire manufacturer's recommended wheel width.
__________________
Kippis

986S
991S
Van Diemen RF97
LAP1DOUG is offline   Reply With Quote
Old 02-12-2014, 03:45 PM   #3
Registered User
 
truegearhead's Avatar
 
Join Date: Jul 2011
Location: Richmond, VA (The Fan)
Posts: 978
They are track tires so I think the the stiffer sidewall would help a bit. They're well beyond tire tack recommendations
__________________
1997 Boxster 4.2L Audi V8 Bi-Turbo
2003 911 C2
NASA HPDE Instructor
truegearhead is offline   Reply With Quote
Old 02-12-2014, 03:56 PM   #4
Registered User
 
BYprodriver's Avatar
 
Join Date: Oct 2008
Location: O.C. CA
Posts: 3,709
Garage
Don't forget these taller than stock tires will reduce torque multiplication & raise ride height.
__________________
OE engine rebuilt,3.6 litre LN Engineering billet sleeves,triple row IMSB,LN rods. Deep sump oil pan with DT40 oil.
BYprodriver is offline   Reply With Quote
Old 02-12-2014, 04:02 PM   #5
Registered User
 
LAP1DOUG's Avatar
 
Join Date: Aug 2011
Location: USA
Posts: 414
Quote:
Originally Posted by truegearhead View Post
They are track tires so I think the the stiffer sidewall would help a bit. They're well beyond tire tack recommendations
I think stiffer sidewalls are actually a negative for fitting narrower rims then intended, as the stiffer side wall will cause more deformation of the tread when it is rolled onto a smaller rim.

I have made measurements for this with NT-01's, which show that if you go over the recommended wheel width the overall tire width will be reduced by approximately half the difference in wheel width. That is if you take the same tire measured on a 10" wheel and mount it on a 9" wheel. you will lose 1/2" of the rated tire width.

A few months ago, GRM magazine did a back to back tire test with BFG Rivals and ZII's, where they changed the wheel width for several runs, and it made a large difference in tire performance with no other changes.

Bottom line seems to be that if you want to take advantage of some really wide tires, you need some really wide wheels.

__________________
Kippis

986S
991S
Van Diemen RF97
LAP1DOUG is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:52 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page