986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Performance and Technical Chat (http://986forum.com/forums/performance-technical-chat/)
-   -   shock/spring to RoW M30 (http://986forum.com/forums/performance-technical-chat/47384-shock-spring-row-m30.html)

navair 08-15-2013 12:17 PM

Weird! I think you have front and rear backwards (orange and yellow base is front, red-red base is rear).
Is that a base Boxster? Tip?

Porsche Boxster Suspension - Page 3

woodsman 08-16-2013 01:50 PM

I've just installed the ROW 030 but can't help because I ordered the Tip even though I have 6 speed because it saved me $250 and I got stiffer RR springs which would make the car be more neutral. What I got was a car that's far stiffer to the point that it doesn't feel like a luxury car anymore but slammed road/race thing that I would have thought was fine when in my 20's or 30's. The springs that came out of my car were red/red and the front were white/yellow. It came from the factory with M030 but someone must have switched them. The car rode nice and handled bumps while driving aggressively, much better. It had more RR roll than I wanted and now I'm thinking that the old springs with bigger bars may be the ticket for me. I can't say how it 'handles' yet as it took me until yesterday to get it aligned and I didn't push it prior.

sb01box 08-20-2013 06:49 PM

got the car back from local indy.
the best that I can see,
the height to the fender wheel well using a yardstick plumbed through the middle of the wheel crest is 26.25 inches and 26.5+ inches front and back respectively. about 1/4 of an inch drop all the way around.
they installed the thicker of the two rubber seats for the springs at both front and back.
definitely less roll.

navair 08-21-2013 11:14 AM

Quote:

Originally Posted by sb01box (Post 358502)
got the car back from local indy.
the best that I can see,
the height to the fender wheel well using a yardstick plumbed through the middle of the wheel crest is 26.25 inches and 26.5+ inches front and back respectively. about 1/4 of an inch drop all the way around.
they installed the thicker of the two rubber seats for the springs at both front and back.
definitely less roll.


For future reference to all, I finally dug this up somewhere in the bowels of Rennlist:
"THE ISSUE IS FINALLY SOLVED!!! I am so happy. After trying everyone from forum experts, to dealers, to Porsche corporate, I finally found someone that could confirm the color changes on the RoW M030 tolerance code. A very helpful expert informed me that in 2002, they changed the tolerance group colors to Blue (for the old green) and Orange (for the old white). My understanding is that the model ID color codes stayed the same. I can finally put this thing to rest! Thanks for all the thoughts and inputs guys!"

sb01box 09-15-2013 07:47 AM

update - shocks were in need of replacement. nice and tight.
A little stiff and can feel every bump in the road.
bottom line,
I don't know what component(s) contribute to what, but with the new shocks, shorter springs and swaybars, the car feels great.


All times are GMT -8. The time now is 10:04 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website