Forced Induction for 2.5L Boxster
So I recently got my hands on a 2.5L '99 Boxster. The thing is a blast to drive! I love having a convertible and getting all those good looks driving downtown.
However, going from an '02 WRX, I find the 986 lacks slightly in the power department. I'm often downshifting to get the speed I want. I've done what research I could in the past few days, and have seen that TPC Racing makes the best forced induction kit. However, I haven't seen anyone install it on the older 2.5L models (the one I drive). TPC Racing's website also seems to be down. I was wondering if anyone could point me in the right direction. |
Quote:
|
3.4L engine sounds very enticing. I've always loved the fast response of NA engines. Can you point me in the right direction of where to look for one?
|
Quote:
Los Angeles Dismantler |
I agree with Topless, from both a cost perspective, as we'l as a reliability one, there have been very few success stories regarding forced induction systems for 986 platform vehicles .
|
Thanks for the quick replies guys! I'll do more research
|
I would stay away from FI, As stated above the base compression ratio is fairly high to TC or SC. To do it properly and to stay in the desired AF it would be advisable to go with stand alone, tons of dyno runs, accurate pyrometer, wide band, drop the compression and at that cost point stick with a 3.4.
If you really want the performance of of your old WRX you can always drop that motor in. |
I don't mean to derail the thread regarding forced induction boxster engines, but if you're interested in more power, search for the guy who put an audi v8 engine in his boxster. There were apparently two engine swaps performed in the usa (one of the guys tried to sell his). The engine is surprisingly cheap $1,000-$2,000, but the integrating it would prove to be very hard I would imagine. Also, another guy on the forums put in a subaru boxer engine his boxster with success, if that interests you as well.
|
OK, my two cents.
Save the money you're planning on a turbo or whatever and trade in for a more recent Boxster S. You would spent sooo much time and money on trying to get your old Boxster running with FI that it would spoil all the fun of driving it. These engines are completely designed as NA, trying to convert them to FI is a can of worms. I know how you feel because I'm driving a Saab Viggen and a base 2002 Boxster. They are completely different beasts, but both have their fun parts and I love driving both of them as long as I keep their differences in mind. So, my option is to have both a FI and a NA car, I drive them depending on my mood and the weather. Another option is to wait until the new turbo-ed flat-4 Boxster comes out. |
There are some add ons you can purchase that will increase the 2.5 performance to the point you will feel the difference but buying HP for a 986 isn't cheap. If you want a bump for the summer try a pulley kit from RSS, if you open up the exhaust at the same time you can get some extra yaya's out. Other than that, my opinion is the best way to buy HP is from the factory in the car you desire. Porsche are really not 0-60 beasts (unless you have sport plus and launch control) or you have purchased a high end 911 the 2.5 Boxster is more about how it handles once it's wound up.
|
Something I picked up from what you said about downshifting to get more power. You should be keeping your revs up anyway with these cars. I try to keep my revs over 2800 all the time even at steady speed. Lugging is about the worst possible thing you can do to these cars. Think of it as a motorcycle with four wheels - tons of power, zip for torque.
|
If it isn't fast enough, here are the options I know about. None are cheap and as effective as their proponents would have you believe and many carry issues with emissions compliance and driveability.
|
Quote:
Here is a link to the Subaru swap, He did a beautiful Job, http://986forum.com/forums/general-discussions/25697-boxster-subaru-conversion-interest.html |
I love the VW 1.8t motor :)
|
Quote:
|
All times are GMT -8. The time now is 12:15 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website