Front end sway
Hello everyone
I have a 2001 Boxster and I just put new rotors, pads and stainless steel lug nuts (lugs off eBay) on. The cars is pretty much stock. The lug nuts have a smaller tapered shoulder than stock but I don't see how that could be the problem. The lugs are torque. Any ideas where the sway maybe coming from? Thanks for any help |
Porsche has a very stern warning to only use Porsche lug bolts. I would first put back the old bolts. If that doesn't fix it, then go back over the brakes.
|
Quote:
One of my Boxster buddies happens to be a mechanical engineer and ran me through the math on stock vs stainless lug bolts. The stock bolts were about 10x stronger. :eek: |
Ok thank you both for the reply. I will put the old lug's back in and see.
|
All times are GMT -8. The time now is 10:12 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website