04 Boxster S Engine for SALE 310 hp
 

THIS IS THE ENGINE YOU HAVE BEEN WAITING FOR - TRACK READY "COMPLETE" ENGINE - COMES WITH LOW MILAGE FLYWHEEL,PRESSURE PLATE AND CLUTCH, COMPLETE EXHAUST SYSTEM, WIRE HARNESS,LOTS OF MODS FOR TRACK USE- AS LISTED BELOW. THIS ENGINE MAKES 310 HP - OIL & FILTER CHANGE AFTER EVERY TRACK (DE) EVENT - NORMALLY WHEN YOU BUY AN ENGINE YOU GET NOTHING BUT THE BLOCK AND INTAKE. THIS COMES WITH ABSOLUTELY EVERYTHING BUT THE TRANS AND CAR . -Never been abused, have the DME print out to show that's it's never been overreved. Milage on engine 51k, the following is a list of mods made on the engine. REASON FOR SELLING- NOTHING WRONG WITH THIS ENGINE. I am installing a much larger Carrera engine in my car.
DYNO RUN ON YOU TUBE http://www.youtube.com/watch?v=VhBB8gBc4VU
1. SOFTRONIC TUNE
2. COLD AIR INTAKE - KN FILTER & ALUMINUM BOX TO SEPERATE FROM ENGINE HEAT
3. MOTORSPORT AOS
4. LN ENGINEERING DEEP SUMP
5. LN ENGINEERING COOLER THERMOSTAT
6. LN ENGINEERING SPIN ON OIL FILTER - USES NAPA OR ADVANCED AP HIGH FLOW FILTERS
7. LN ENGINEERING MAGNETIC DRAIN PLUG
8. LN ENGINEERING IMS BEARING FIX
9. TECHNOLABS INTAKE PLANUM
10. IBP UNDERDRIVE PULLEY
11. HEADERS ( 2" outlet pipe)
12. CAT DELETE INTERMEDIATE PIPES (larger diameter - 2")
13. BORLA MUFFLER
Some parts manufactured by West Side Auto (store coming soon) This is a turnkey system, nothing else to buy, the only thing that can make this engine go faster is strap a turbo on it.(not recommended)
ASKING $6900.00

It's a good deal if anyone needs one. thanks for looking

How much are you asking? You forgot to list a price.

So this is still a 3.2 engine?
Is the 310 HP at the crank or at the rear wheels? Have a dyno graph?

310 at the crank or wheels is still great for a 3.2, heck its great for a 3.4 The youtube video was showing 259s wheel. Still over hp for a 3.2 at the wheel.????
Jake any input?

This car had intake an exhaust done, so 259 at the wheels (as seen in his dyno vid, actually I think it was 262) for a 3.2 is quite reasonable, actually. Not sure how he translated that to 310 at the crank, though.

Sorry Guys, I must have been asleep at the wheel. Actually head first in my engine swap. Price as edited -asking is $6900.00 everything included DME imobilzer etc.
HP was 262 @ rear whell which translates to 309.5 or something with a 17% drivetrain loss. Jake correct me if I'm wrong. i just rounded off to 310 and there is a video linke which I screwed up for the dyno. you can also watch some of the other vids @ Sebring with this engine smoking all the Carreras and a couple of GT3 (Yah I know they weren't good drivers but my lap times were 2.33 which is no record by any means but I know a couple of guys who were pro driver doing the same time as me(in their modified 997 turbo's - go to youtube and in the search window type "harryrcb" (without quotes) and you will find the other vids.

I will try again with the dyno vid. I can't seem to get it just copy and paste this
http://www.youtube.com/watch?v=WlsycIGJWqA

Still Available !!!

Harry!
 

Harry!!!

How is it going? It's Trinidad. How is that new project going? The Long Beach PCA region has a classified section in there magazine, that might be a good place to post this engine. I saw your videos on youtube as you already know and that engine pulls hard.

Good luck with the sale and let me know how that new project is going.

Thanks Trinidad. the project is coming along. had the engine up for a test fit and found I needed another $1k in parts. Sigh (what esle is new?) anyway waiting for the parts . Trans is all mated up, flywheel , cllutch etc. most of the coolant lines fuel lines and vacuum lines are ready to go. Still need to wrestle with the wiring harness. I will most likely start posting updates next week.
Thanks for you interest and the tip on selling the engine. Have a few guys interested. almost closed the deal the other day but the wifey had some other plans. haha

Just to make it clear all the stuff that comes with engine besides upgrades

dual mass flywheel with only 20k on it
pressure plate, clutch disk with only about 10k on it
complete engine wire harness
front motor mount - Cayman -10k old
DME with Softronic tune worth $800.00
Immobilizer
complete exhaust system - headers back
cold air intake tube with maf sensor and filter

It doesn't get any better than this