Error code with engine swap

[der Geist]

I am almost done with my engine swap and I am running into a small problem.

I have an 03 Boxster and am putting a 3.4 996 motor in it from an'01

Everything seems to be running great. Idle is good, tons of power. The only problem is that the engine is throwing a 0349 phase sensor 2 camshaft hall effect 2 error code. I had new sensors put in but I am still getting the code in spite of everything running great. Could this just be an bug because I am using the 03 DME with the "01 motor? Any ideas for a fix?

Thanks,

[tholyoak]

Early motor with basic variocam has 25 degrees of cam advance, late dme (7.8) expects to see 40. The two are incompatible in stock form.

-Todd

[der Geist]

Originally Posted by tholyoak

Early motor with basic variocam has 25 degrees of cam advance, late dme (7.8) expects to see 40. The two are incompatible in stock form.

-Todd

Thanks Todd-I knew you would have an answer to that.