02 sensors & Trouble codes
I just became a new owner of a used Boxster S.
Thanks for the replies to my previous post. The car seems pretty tight but I have a few codes that are set, apologize for my lack of experience with these flat 6 engines but I would like to try to sort them out myself if at all possible. P0102-Mass air flow sensor, I have heard these can be cleaned before you buy new, What should I use? P1126 and P1133 are both oxygen sensing adaptation, lower load banks 1 & 2 Since there are 4 O2 sensors, Which ones are these? I cleared the faults, if they come back should I replace the o2 sensors? I don't think these can be reworked. |
Quote:
|
+1 on previous post. I would just add... You hear way more of what has gone wrong with my boxster than what hasn't on these sites. Yes there are issues out there, but if you do proper preventative maintenance you can avoid most of these.
And yes drive the piss out of it. Unscientificly, people tend to have less problems with their boxsters if they drive it like they stole it. idea is the oil is heated up to proper temps and that was how it was suppose to be driven. |
IMS issues are largely a non-issue for 2006 and later cars, and completely an impossible issue on a Series 2 car. Your car may have the dual row bearing, which is more robust than the later single row, but I'd still swap it for the upgraded piece if it were my car.
|
All times are GMT -8. The time now is 02:12 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website