10-12-2008, 05:58 PM
|
#1
|
Registered User
Join Date: Oct 2008
Location: Gastonia, NC
Posts: 38
|
Air bag light glowing
Seeking technical advice. I'm in negotiations to purchase a 98 Boxster with 86,000 miles. Car runs great but the air bag light is glowing. Owner tells me the battery was just change and the light has stayed on since the new battery was installed. Question: Does something need to be re-set to get the light to go off after start up? Can this be done with out having to take it to a Porsche dealer? Or, am I being handed a bull s story and there is a problem with the air bag circuitry?
Please advise. Thanks!
|
|
|
10-12-2008, 07:11 PM
|
#2
|
There Is No Substitute.
Join Date: May 2007
Location: West Coast
Posts: 3,253
|
I don't think the owner knows what he's talking about. Airbag lights can get triggered (it's probably not the circuitry), but unfortunately only a Porsche dealer can reset an airbag light, unless you know someone with the software. It's a safety issue so you can't reset with an OBC reader from autozone. I would recommend you get the Porsche dealer to do a PPI, and check the light while there at it, just to make sure.
__________________
1999 Ocean Blue Metallic Boxster - blueboxster.com
|
|
|
10-12-2008, 08:44 PM
|
#3
|
Registered User
Join Date: Jan 2007
Location: Depends on the day of the week....
Posts: 1,400
|
Sounds more like the latter than the former. Disconnecting the battery would not trigger the airbag light, and it cannot just be re-set by most shops. You need a PST (Porsche specific computer) to re-set it, so you're going to have to either to go the dealer or find an independent Porsche shop.
If you haven't already, have a shop do a PPI on the car before you even consider buying it.
Patrick
|
|
|
10-13-2008, 12:53 AM
|
#4
|
Registered User
Join Date: Jul 2006
Location: Virginia
Posts: 916
|
Will the durametric software reset the airbag light?
Ed
__________________
My Car Webpage
2000 2.7L Boxster 102K; TTP intake, headers, high-flow cats; Dansk high-flow muffler; Autothority ECU chip; TechnoTorque 2; Bilstein coilovers; Racing Dynamics strut brace; stress-bar suspension kit; Aasco lightweight flywheel, B&M short shiftkit; 18" wheels; spare tire delete; OEM GT3 seats; JL audio speakers and subwoofer; Alpine PDX-5/PDX-2 amps; Kenwood DNX8120 CD/DVD/Nav; litronics, deambered
|
|
|
10-13-2008, 01:55 AM
|
#5
|
Registered User
Join Date: Dec 2005
Location: South Riding, VA
Posts: 322
|
Ed,
Durametric will reset the airbag light.
|
|
|
10-13-2008, 05:20 AM
|
#6
|
Registered User
Join Date: Nov 2006
Location: In the garage...
Posts: 1,702
|
Yes, Durametric will reset the airbag light.
Yes, get a PPI done.
Yes, airbag light being on could have simply been triggered by changing of battery IF key was left in the ignition when disconnected and then reconnected.
|
|
|
10-13-2008, 06:28 AM
|
#7
|
Registered User
Join Date: Dec 2005
Location: Coppell, TX
Posts: 317
|
It's also possible the seatbelt receptacle contacts are bad. This is common on earlier Boxsters. It requires new receptacles with redesigned contacts to be installed. Easy DIY but a dealer will charge over$700.00. PPI wil confirm.
__________________
"97 Boxster" Guards Red, Coppell, TX 36,500 miles
2010 Mazda CX-7 AWD, Turbo, Grand Touring
|
|
|
10-13-2008, 01:00 PM
|
#8
|
Registered User
Join Date: Jul 2004
Location: Houston, Texas
Posts: 7,243
|
spraying the slot of each seatbelt receptacle with electronics contact cleaner can often fix them right up without replacement.
BTW, these are about $30 each from Sunset in Oregon... and very easy to replace yourself with a few hand tools.
|
|
|
10-14-2008, 05:52 PM
|
#9
|
Registered User
Join Date: Oct 2008
Location: Gastonia, NC
Posts: 38
|
Air bag light glowing / response
Thank you to .....rrk3000, bmwm750, edevlin, BurgBoxster, rdancd816 & RandallNeighbour for your valuable input regarding the air bag light. I have requested the seller to have the vehicle inspected at the Porsche facility and resolve the glowing air bag light as a condition of sale.
|
|
|
11-30-2008, 05:26 PM
|
#10
|
Registered User
Join Date: Aug 2005
Location: Orlando
Posts: 100
|
If you spray the contacts with a cleaner will the airbag light go off if the connection is back to normal?
|
|
|
12-01-2008, 05:56 PM
|
#11
|
Registered User
Join Date: Dec 2005
Location: Coppell, TX
Posts: 317
|
Nope, the airbag light will need to be reset with a durometric tool or at the dealership.
__________________
"97 Boxster" Guards Red, Coppell, TX 36,500 miles
2010 Mazda CX-7 AWD, Turbo, Grand Touring
|
|
|
12-02-2008, 08:59 AM
|
#12
|
Registered User
Join Date: Aug 2005
Location: Orlando
Posts: 100
|
Is the Duremetric tool scan the whole porsche boxster for other errors codes example check engine light. can you rent one or buy one and how much.
Also how would I know then if I fixed the seat belt connector if the light does not go out?
thank
|
|
|
12-02-2008, 10:43 AM
|
#13
|
Registered User
Join Date: Feb 2008
Location: Du Monde
Posts: 2,199
|
Quote:
Originally Posted by Joji
Is the Duremetric tool scan the whole porsche boxster for other errors codes example check engine light. can you rent one or buy one and how much.
Also how would I know then if I fixed the seat belt connector if the light does not go out?
thank
|
Durametric - Durametric is essentially software that you load onto a laptop. It is more thorough than an ordinary OBDII scan tool. Through a USB interface adapter attached to the OBDII diagnostic port in the car, it can read the DME for stored codes and clear/reset them when the fault condition is corrected, including the airbag warning light. It will not read/reset alarm codes, program keys, etc. though.
The seatbelt connector is a switch. Once clean and the contacts complete the circuit, the unit is fixed (you only need a DMM - multimeter to know that it is fixed, but, this will not turn off the airbag warning light), the Durametric will.
Last edited by Lil bastard; 12-02-2008 at 10:46 AM.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 06:11 PM.
| |