Hey All, I recently picked up a project 2002 Porsche Boxter 2.7L Tiptronic. Car doesn't start at the moment, previous owner stated it was just a starter. Rather than doing the smart thing and troubleshooting a bit, I just picked up a starter and proceeded to install it. I've since determined that it's more likely an immobilizer issue but that being said, I managed to break some type of hard line hose that sits under the intake manifold and in front of the starter. Can anyone help identify this hose so I can see if I can find a replacement?
That looks like a "Breather Hose" that crosses the engine from the AOS on the right rear to the PCV valve on the left front. It's a pain to replace because it crosses through the intake plenum. I have seen them 'successfully' repaired with a section of hose in the same diameter.
__________________ I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
Parts Car, car parts
Honda Del Sol(s)
"Hers"
My Original '99
The 78 F350
This
That
The S 2.5
Other
Hybrid Mode
