986 Forum - The Community for Porsche Boxster & Cayman Owners
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   DIY Project Guides (http://986forum.com/forums/diy-project-guides/)
-   -   DIY: Repair HVAC Blend Doors using Plastic Plugs (i.e. fix for foam in air vents) (http://986forum.com/forums/diy-project-guides/81960-diy-repair-hvac-blend-doors-using-plastic-plugs-i-e-fix-foam-air-vents.html)

subieworx 06-19-2023 03:15 AM
I would use tape designed to seal off deck joists. It is the stickiest tape I have ever found and specifically designed for use in damp environments.

Kurtmanfoz 04-10-2024 03:54 AM
.
 
Would prefer to use these plugs but they won't post to Australia!

Makrilli 04-10-2024 11:13 PM
Quote:
Originally Posted by Kurtmanfoz (Post 660155)
Would prefer to use these plugs but they won't post to Australia!
Here's an stl I found on thingiverse if you or somebody you know can print ABS or PETG.
Or you can use some commercial 3D printing solution like shapeways.
I've not tried these myself but I will later this summer.


All times are GMT -8. The time now is 06:39 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website