Now iv painted my release catches
 

Hi Caps
While I'm on a roll I thought id paint my badly scuffed release catches

here are some before, during and after picshttp://986forum.com/forums/uploads02...1499772710.jpg

during
 

After carefully masking and flatting them off, I gave them 2 coats of high build primer
then 2 coats of silver then 2 coats of 2 pack clearhttp://986forum.com/forums/uploads02...1499772915.jpg

After
 

Here they are all done, I very slightly marked one with my nail demising but its not bad

Im a graphic designer so Have redrawn the icons and my mate who has a vinyl company will make the stickers for me to apply

All in all an easy job, masking was the tricks bit.

At the same time I'm getting new transfers made for the calliper repaint (next job)http://986forum.com/forums/uploads02...1499773232.jpg

This looks great, and is a task that I was planning to do!

But the hold-up had been the duplication of the pictures. So if your mate could make a spare set of decals, I'd be keen to get some also.

Can do?

Thanks - DM

No worries I got a spare set made, alternatively I could email you the artwork I created and any local vinyl to you will be able to use it.

Forgot I hadn't posters a picture with the decals on

Iv made it slightly thicker as is was thinner than the parameters of the vinyl cutter but I think it looks stock.

http://986forum.com/forums/uploads02...1500305451.jpg

I need to do this! My black sills are scuffed as well.

Thanks! Let me know what I need to do!

id need to email the file to you

job well done

Hi would be great to get a copy of the artwork if possible!

Email is in my profile :)