986 Forum - for Porsche Boxster & Cayman Owners

986 Forum - for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   DIY Project Guides (http://986forum.com/forums/diy-project-guides/)
-   -   Match Factory Glazier White paint for front bumper (http://986forum.com/forums/diy-project-guides/64616-match-factory-glazier-white-paint-front-bumper.html)

project986miami 12-08-2016 08:14 AM

Match Factory Glazier White paint for front bumper
 
Does anyone know the exact after market paint to use to match the factory Glazier white paint on a 1999 boxster? I bought some krylon but it didn't match perfect.

particlewave 12-08-2016 08:17 AM

You are posting in the wrong section. Use the general discussion forum linked below. ;)

General Discussions - 986 Forum - for Porsche Boxster Owners and Others

Krylon? Yeah...that won't do.
For factory matched paint, including Glacier White, go to automotivetouchup.com. No paint will be a perfect match due to paint fade and wear.

Converse986Black 12-08-2016 05:19 PM

Either take off your factory gas door, take it to Gladwin, Sherwin or an O'Reilly's with paint mixing. They can scan the cap and mix you up a quart to spray on the bumper. You will need to grab some primer but Krylon spray paint in a can??

achillies 12-09-2016 06:24 AM

automotivetouchup.com

lkchris 12-12-2016 09:30 AM

I bought a replacement bumper and had it repainted at a Porsche specialist body shop.

In addition to determining the paint code, I had to leave my car there so they could match the paint I actually had in its current condition. It's perfect.


All times are GMT -8. The time now is 10:51 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website