986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   DIY Project Guides (http://986forum.com/forums/diy-project-guides/)
-   -   How to: Remove and clean the Throttle Body and MAF Sensor (with video) (http://986forum.com/forums/diy-project-guides/63204-how-remove-clean-throttle-body-maf-sensor-video.html)

neil_b 09-18-2016 09:24 AM

How to: Remove and clean the Throttle Body and MAF Sensor (with video)
 
Keep the car running smoothly and potentially get back some lost performance by cleaning the Throttle Body and Mass Air Flow sensor

The throttle body controls air flow into the engine and will open and close when you press or release the accelerator pedal.

The MAF or Mass Air Flow sensor is a device that measures the density of the air coming into the engine from the air intake. This data is used by the car’s computer to help correctly control engine fuelling.

Over time these will get dirty so if you think your car is running a bit sluggish or worse stalling or in limp mode then cleaning them may cure this problem.

Step by step video here:

https://www.youtube.com/watch?v=slPzoplzWT0&hd=1&html5=1


http://986forum.com/forums/uploads02...1474219413.jpg


All times are GMT -8. The time now is 07:40 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website