986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   DIY Project Guides (http://986forum.com/forums/diy-project-guides/)
-   -   Help converting Halogen to Xenon Headlights (http://986forum.com/forums/diy-project-guides/53583-help-converting-halogen-xenon-headlights.html)

jressling85 08-07-2014 08:37 AM

Help converting Halogen to Xenon Headlights
 
I purchased a set of 2002 Boxster S Xenon headlights. The headlights have two connectors, the normal one and one that looks like it connects to the ballasts. I believe the extra connector is for the leveling and self adjusting. I would like to still have this feature. Would anyone be able to send me a schematic of the how the wires are connected and which wire does which part?

Nine8Six 08-07-2014 04:18 PM

I'm not much help on that subject but heard/read a few times that you need to source a litronic retrofit kit if your car didn't come with factory litronics. Wouldn't be surprised these kits are rare or need ordering. Kits includes a harness for both headlight and a control module (bosch mgf). There are also sensors that are mounted onto the suspension giving you the full features of the factory installed litronic. Not sure if the sensors are mandatory... think not but not 100% sure.

Again I could be wrong but the harness and control module kit only provides some leveling features, at some extent e.g the high beams won't be as effective as if you'd be doing the complete factory-style set-up e.g. sensors installation, control module and harness setup (lots of work, and costly).

Surely some others who've done a proper litronic conversion will chime in and help you out with this

Nine8Six 08-07-2014 04:26 PM

found P/N: 000 044 900 38 as being the original retrofit kit for 996s. Should be the same for the Boxster but confirm with your supplier before.

You need to make mods to the DME also, wiring the thing to ECU, etc. Not for the hobbyist ;)

Luck mate

Pdwight 08-09-2014 04:07 PM

If it were me
 
I would just install them and aim them......

guesswecan777 08-21-2014 07:18 PM

I believe there are tutorials on youtube

JFP in PA 08-22-2014 05:08 AM

Quote:

Originally Posted by jressling85 (Post 413490)
I purchased a set of 2002 Boxster S Xenon headlights. The headlights have two connectors, the normal one and one that looks like it connects to the ballasts. I believe the extra connector is for the leveling and self adjusting. I would like to still have this feature. Would anyone be able to send me a schematic of the how the wires are connected and which wire does which part?

This the headlight control unit (Porsche part number 000-044-900-38), which retails for around $100:

http://www.skylersrants.com/Porsche/...s/P0000737.jpg

And here it is installed:

http://www.skylersrants.com/Porsche/...b/P0000769.jpg

And this will take you to one of the best Litronics DIY tutorial's ever done, with complete wiring instructions and photos:

Installing Litronic Headlights


All times are GMT -8. The time now is 08:25 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website