Rear Spoiler Motor replacement/install
 

Hi everyone.
I need some help. I have a 08' Boxster and I removed the GT wing that was installed by the previous owner. He left me the original spoiler and motor. Since I didn't remove it, I have no idea how to install it. Has anyone ever replaced their motor or know of a write up somewhere on how to install the spoiler motor? At least some pictures would help. I pulled back the carpet inside the trunk attached to the bumper. I can see where the motor should go but I don't know where to mount it. The bumper was also replace with an aftermarket bumper so there is no previous holes to guide me. Any ideas?
Thanks,
Peter

http://986forum.com/forums/uploads01...1404518632.jpg


http://986forum.com/forums/uploads01...1404518663.jpg


http://986forum.com/forums/uploads01...1404518687.jpg


http://986forum.com/forums/uploads01...1404518712.jpg


http://986forum.com/forums/uploads01...1404518885.jpg

These photos are for a 2004, I'm not sure how similar a 2008 is.
Do you need more direction than this?

Wow
 

I had no idea that mechanism was that larger and heavy

What are you doing with the GT spoiler ?