08-03-2013, 12:05 PM
|
#1
|
|
Registered User
Join Date: Jul 2013
Location: Simi Valley
Posts: 153
|
How do I install new side markers?
I just bought smoked side markers but I'm not very saavy with a wrench. How do I switch these out? Can someone help...thank you in advance!
|
|
|
|
08-03-2013, 12:58 PM
|
#2
|
|
Registered User
Join Date: Oct 2008
Location: Ohio
Posts: 868
|
On my '98 they just snap out. The wire connecting the light is short, so don't go too far with the old lamp before you twist and remove the bulb along with its socket. The new clear lens just snaps in. It takes quite a bit of pull to get it out, but trust me, it will pop out.
|
|
|
|
|
08-05-2013, 06:19 AM
|
#3
|
|
Registered User
Join Date: May 2010
Location: Austin, Texas
Posts: 183
|
Touch the Icon,
From my experience taking one light assembly off to replace a bad bulb and later taking the front bumper cover off to clean out the radiators, this worked for me:
My recommendation is from the front push the light assembly back toward the wheel well.
There is a spring like clip at the wheel well end of the light assembly. It will give just enought to clear the two little plastic prongs on the front end.
To replace the light assembly, put the rear end (wheel well end of the assembly) in first and push it back until the front two prongs can clear and be pushed in.
MNC-I
|
|
|
|
|
08-05-2013, 06:33 PM
|
#4
|
|
Registered User
Join Date: Jul 2013
Location: Simi Valley
Posts: 153
|
Thank you guys it worked like a charm!
Much easier then I could have ever imagined. Have either of you replaced the corner of the headlights? Thats next on my list
|
|
|
|
|
08-09-2013, 05:48 AM
|
#5
|
|
Registered User
Join Date: Dec 2006
Location: Santa Barbara, CA
Posts: 308
|
replacing the filament bulb with LED will transform the marker lighting to cool white color. do the same for the driving light (not the headlight) in the headlight assembly.
|
|
|
|
|
08-09-2013, 09:17 AM
|
#6
|
|
Registered User
Join Date: Oct 2012
Location: Wake Forest, NC
Posts: 867
|
Cool white color may be illegal in some states.
__________________
2000 Boxster S, 6 speed, Sport Package, Litronics, LED tail lights, LNE IMS-B, OBC, Skybreaker wind deflector, Arctic Silver/Graphite Grey
|
|
|
|
|
08-17-2013, 10:09 AM
|
#7
|
|
Registered User
Join Date: May 2013
Location: Hollywood
Posts: 12
|
It's a great upgrade and I replaced the bulbs with an LED. On a silver 2004 986 it's a great look. Now if I could get them to stay on with headlights and flash with turn signal I'd be very happy. It appears that we'd need a separate bulb mount on the housing. I thought about trying to engineer it with my old side marker bulb fixtures, but haven't got that far.
So why stop there you ask...well I didn't.
Had the flasher mod done by my audio installer.
Changed out all interior lights to LED. Replaced headlight with HID, and parking lights with LED.
Had the DRL mod done by my audio installer and replaced the bulbs with LEDs.
Replaced license plate lights and both trunks with LEDs.
Last edited by markmc55; 08-17-2013 at 10:12 AM.
|
|
|
|
|
08-17-2013, 03:02 PM
|
#8
|
|
Registered User
Join Date: Oct 2008
Location: Ohio
Posts: 868
|
When I replaced my side markers with clear, I also put in silver bulbs that have an orange filament. Problem is, they get hotter than hell and I was afraid they would actually melt the lens.
|
|
|
|
|
08-17-2013, 08:09 PM
|
#9
|
|
Registered User
Join Date: Aug 2011
Location: Allen, TX
Posts: 14
|
Sounds like a few of you have replaced stock bulbs with LEDs. Has anyone replaced the tail light bulbs with LED? If so, where did you get the LEDs and what type did you use? Any issues?
__________________
-Paul
Seal Grey 2003 S
|
|
|
|
|
08-18-2013, 09:07 AM
|
#10
|
|
Registered User
Join Date: May 2013
Location: Hollywood
Posts: 12
|
Quote:
Originally Posted by particlewave
Please don't tell me that you just put hid bulbs in the existing sockets without projectors. You did, didn't you? 
Pictures, or it didn't happen  |
I bought the LEDs from here: http://store.ijdmtoy.com/
They have a bulb selector program for any car. All were error free. Good retailer, large inventory, knowledgeable.
For the HIDs, yes my tech installed them in the sockets. What's the issue?
Last edited by markmc55; 08-18-2013 at 09:14 AM.
|
|
|
|
|
08-18-2013, 11:18 AM
|
#11
|
|
Registered User
Join Date: Feb 2011
Location: Algonquin, Misarikwack
Posts: 710
|
...........................
Last edited by madmods; 08-24-2013 at 07:10 AM.
|
|
|
|
|
08-18-2013, 11:22 AM
|
#12
|
|
Registered User
Join Date: Feb 2011
Location: Algonquin, Misarikwack
Posts: 710
|
....................................
Last edited by madmods; 08-24-2013 at 07:10 AM.
|
|
|
|
|
08-18-2013, 11:40 AM
|
#13
|
|
Registered User
Join Date: May 2013
Location: Hollywood
Posts: 12
|
Quote:
Originally Posted by particlewave
...completely selfish and irresponsible. 
...But hey, if you don't mind... |
I appreciate your information and noted the unfocused light spill is negligible. I will conduct my own research regarding the legality of the modification.
However, I don't appreciate your snide and condescending comments and tone. They were completely unnecessary, offensive in nature and only dilute the value of your comments.
|
|
|
|
|
08-18-2013, 02:19 PM
|
#14
|
|
Custom User Title Here
Join Date: Mar 2012
Location: Ft. Leonard Wood
Posts: 6,163
|
Appreciation is not necessary or needed. When you post on a public forum, expect uncensored opinions. I'm not here to stroke your ego.
You are welcome to your opinion
It's not like I said that it is completely "ghetto fabulous", a la 1991 Honda Civic. 
__________________
https://youtube.com/@UnwindTimeVintageWatchMuseum
Last edited by particlewave; 08-20-2013 at 07:49 AM.
|
|
|
|
|
08-18-2013, 02:42 PM
|
#15
|
|
Registered User
Join Date: May 2013
Location: Hollywood
Posts: 12
|
Quote:
Originally Posted by particlewave
Appreciation is not necessary or needed. When you post on a public forum, expect uncensored opinions. I'm not here to stroke your ego.
You are welcome to your opinion
It's not like I said that it is completely "ghetto fabulous", a la 1991 Honda Civic. |
As William Shakespeare once said, "I'd challenge you to a battle of wits, but I see you're unarmed".
|
|
|
|
|
08-20-2013, 03:54 PM
|
#16
|
|
Registered User
Join Date: Jul 2013
Location: Simi Valley
Posts: 153
|
Just got these in today from Pelican Parts, should I attempt the install? 
|
|
|
|
|
08-21-2013, 02:16 PM
|
#17
|
|
Registered User
Join Date: Jul 2013
Location: Simi Valley
Posts: 153
|
Got em in people! I couldnt wait for anyone to respond lol. It was much easier then I could have ever imagined.
|
|
|
|
|
08-21-2013, 02:51 PM
|
#18
|
|
Registered User
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
|
I never thought the topic of side markers could draw so much discussion. 
__________________
Don't worry … I've got the microfilm.
|
|
|
|
|
08-24-2013, 09:18 AM
|
#19
|
|
Living in the desert.
Join Date: Jun 2013
Location: Tombstone, AZ
Posts: 82
|
Quote:
Originally Posted by markmc55
For the HIDs, yes my tech installed them in the sockets. What's the issue?
|
OMG! I'm so embarrassed for you
Last edited by tonichristi; 08-24-2013 at 09:24 AM.
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 05:06 AM.
| |
Boxster S
Genesis 3.8
Dangermobile
