Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > DIY Project Guides

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-04-2011, 08:44 PM   #1
2006 987
 
986_inquiry's Avatar
 
Join Date: Dec 2006
Location: st. louis
Posts: 443
Garage
$6 iPhone holder - removable, does not damage, driver viewable, convenient position

One of the biggest challenges I had with the Boxster after buying it was where to put the iPhone?

I had a tom tom in my Avalon but I didn't want to put a GPS in a convertible soft-top car, especially in St. Louis. So I figured I'd use my Waze on my iPhone as my GPS, but to do that I needed to place my iPhone in a convenient location in the Boxster where I could see and reach it but also easily remove it.

So I was wandering through Walmart automotive as I've been known to do and stumbled across this bargain:


$6 for a vent mount phone holder.

"Huh" you say, "but I don't want to put anything on the vent, it might hurt the vent!"

"Read on," I say

So I go about putting in my car but not by clipping it to the vents. Instead I slide the clips onto the top section of the vent where the vent meets with the car, so it's not really clips onto any vents, it's on the car's vent's plastic and the dash itself:


Sorry for the poor photo, taken with a iPhone 3GS from inside my garage and the 3GS does not have a flash (4 or 4S coming soon)

So it's on there pretty snug!! ... or so I thought. Fell off the next day as I was using it.

But never fear! 3M magic tape to the rescue!


A few years ago I bought a roll of 3M Exterior Mounting Tape from Autozone because I read it worked wonders at mounting emblems outside of vehicles and I needed it to attach something to a dash. They weren't kidding, years later it's still doing it's job and it even came off the dash pretty easily when it came time to remove it.

So I put some of that down at the top of the vent on the dash where the top feet would be going over it and then shoved the vent holder back on. I'll take photos if anyone's interested in this.

Several days later it's still there, snug as ever, because the more it tries to pull off the more the 3M tape bunches up so it's not falling off any time soon.

There you have it, how to mount a easily removable $6 iPhone holder in a Porsche Boxster.

(I also attached all the images in case they're someday removed from the free image hosting website I used)
Attached Images
     

Last edited by 986_inquiry; 12-14-2011 at 04:46 PM.
986_inquiry is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 05:28 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page