Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster Racing Forum

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-25-2017, 08:00 AM   #1
Registered User
 
seningen's Avatar
 
Join Date: Jul 2008
Location: austin
Posts: 824
Diagram of Fulcrum pin locations on Transmission?

I picked up some steel fulcrum pins from a SPB team.

I'm looking for a diagram where they are located on the tranny.

Ideally, it would be a for a 6speed as that is what I have. I know
the pins are the same -- but the locations maybe different.

However, if I know where to look on the 5 speed, I might have a better clue
for my mechanic and I on the 6 speed.

thanks,

Mike

__________________
Drivers: '15 Panamera Hybrid (wife's), ' 01 996 GT2, 00 Boxster S, '96 993 Çab/Tip (wife's)
Race Cars: '75 911 RSR Replica & '99 Spec Boxster
mike@lonestarrpm.com
seningen is offline   Reply With Quote
Old 04-25-2017, 01:44 PM   #2
Registered User
 
Join Date: May 2007
Location: California
Posts: 120
They're pretty hard to miss -- one on each side, at the trailing edge of the main housing (not the tail cap), near the top on the left side and about half way up on the right side, with a large Torx bit head. In these photos (found on image search), they're black.

left side


right side
trygve is offline   Reply With Quote
Old 04-26-2017, 05:00 PM   #3
Registered User
 
seningen's Avatar
 
Join Date: Jul 2008
Location: austin
Posts: 824
Turns out the pins are not the same for the 5 speed as the 6 speed.

We found the problems was a pin in the shift rod had fallen out and
was caught on the magnetic plug.

Sourcing new pins and will re-install shift rods in the morning.

I now have 5 Speed fulcrum pins for sale :-)

thanks,

Mike


Mike
__________________
Drivers: '15 Panamera Hybrid (wife's), ' 01 996 GT2, 00 Boxster S, '96 993 Çab/Tip (wife's)
Race Cars: '75 911 RSR Replica & '99 Spec Boxster
mike@lonestarrpm.com
seningen is offline   Reply With Quote
Old 06-15-2017, 04:04 PM   #4
Registered User
 
Join Date: May 2015
Posts: 2
Still looking to get rid of those steel pins? We could put them to use here in the NorCal SPB group.

tgsmith4845 is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 05:01 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page