Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster and Cayman Classified Ads > Boxster and Cayman Parts for Sale or Wanted

Post Reply
 
LinkBack Thread Tools Display Modes
Old 02-14-2017, 02:59 PM   #1
Registered User
 
Muskoka Minute's Avatar
 
Join Date: Nov 2015
Location: Bracebridge, Ontario
Posts: 256
Garage
WTB: 2003 2.7 Core

We are looking for a 2003 2.7 core.

If anyone has/knows of one we would appreciate it.

Cheers! Bart

__________________
My Beast 2004 Boxster SE #0174
- 3.8 with all the internal goodies, Under-mount Pulley, IPD Plenum, 996 Intake, Softronic Tune, 987 Factory Sport Exhaust, skid plates, IMS solution, Ohlins R&T, RSS Toe Links, Camber Plates, Michelin Pilot Super Sport on all 4 corners, Alpine Double Din c/w new speakers & amps.
Muskoka Minute is offline   Reply With Quote
Old 02-14-2017, 04:11 PM   #2
Registered User
 
Join Date: Jul 2013
Location: Bastrop, Tx
Posts: 2,643
I have one I might be picking up soon. Do you need a "good" core?
__________________
Woody
itsnotanova is offline   Reply With Quote
Old 02-18-2017, 09:13 AM   #3
Registered User
 
Muskoka Minute's Avatar
 
Join Date: Nov 2015
Location: Bracebridge, Ontario
Posts: 256
Garage
We need a good block is what we are after.
__________________
My Beast 2004 Boxster SE #0174
- 3.8 with all the internal goodies, Under-mount Pulley, IPD Plenum, 996 Intake, Softronic Tune, 987 Factory Sport Exhaust, skid plates, IMS solution, Ohlins R&T, RSS Toe Links, Camber Plates, Michelin Pilot Super Sport on all 4 corners, Alpine Double Din c/w new speakers & amps.
Muskoka Minute is offline   Reply With Quote
Old 02-20-2017, 12:47 PM   #4
Registered User
 
Join Date: May 2013
Location: Central Illinois
Posts: 403
2004 IMSB Failure

I have a 2.7 removed from a 2004 (03 & 04 are compatible) that was pulled due to a failed IMSB. The failure was catastrophic, meaning the bearing had come completely apart so lots of metal debris in oil. I can load it onto a pallet and strap it down. Also have a forklift to facilitate loading. If you don't need the heads, I'd like to remove them (hoping they can be saved after new valves), and the accessories. I don't know what the value of the remaining pars are. Please make a bid if you are interested.

Thanks,
Joe
Xcellr8 is offline   Reply With Quote
Old 02-21-2017, 10:03 AM   #5
Registered User
 
Muskoka Minute's Avatar
 
Join Date: Nov 2015
Location: Bracebridge, Ontario
Posts: 256
Garage
Quote:
Originally Posted by Xcellr8 View Post
I have a 2.7 removed from a 2004 (03 & 04 are compatible) that was pulled due to a failed IMSB. The failure was catastrophic, meaning the bearing had come completely apart so lots of metal debris in oil. I can load it onto a pallet and strap it down. Also have a forklift to facilitate loading. If you don't need the heads, I'd like to remove them (hoping they can be saved after new valves), and the accessories. I don't know what the value of the remaining pars are. Please make a bid if you are interested.

Thanks,
Joe
Afternoon

All we need is the eng block.
You can keep everything if else if you want.
Can you check the block to let me know if it is OK?
Please advise

Thanks Bart.
__________________
My Beast 2004 Boxster SE #0174
- 3.8 with all the internal goodies, Under-mount Pulley, IPD Plenum, 996 Intake, Softronic Tune, 987 Factory Sport Exhaust, skid plates, IMS solution, Ohlins R&T, RSS Toe Links, Camber Plates, Michelin Pilot Super Sport on all 4 corners, Alpine Double Din c/w new speakers & amps.
Muskoka Minute is offline   Reply With Quote
Old 02-21-2017, 10:26 AM   #6
Registered User
 
Join Date: Jul 2013
Location: Bastrop, Tx
Posts: 2,643
I just picked up the core I was getting. I don't know the extent of the damage but it doesn't look good. Water came out the exhaust manifold and I saw metal bits on top of the valves
__________________
Woody
itsnotanova is offline   Reply With Quote
Old 02-23-2017, 12:54 PM   #7
Registered User
 
Muskoka Minute's Avatar
 
Join Date: Nov 2015
Location: Bracebridge, Ontario
Posts: 256
Garage
Quote:
Originally Posted by itsnotanova View Post
I just picked up the core I was getting. I don't know the extent of the damage but it doesn't look good. Water came out the exhaust manifold and I saw metal bits on top of the valves
PM Sent.

How did you make out with the block? Good? No Good?
We also need a crank shaft.

Please let us know, Thanks Bart

__________________
My Beast 2004 Boxster SE #0174
- 3.8 with all the internal goodies, Under-mount Pulley, IPD Plenum, 996 Intake, Softronic Tune, 987 Factory Sport Exhaust, skid plates, IMS solution, Ohlins R&T, RSS Toe Links, Camber Plates, Michelin Pilot Super Sport on all 4 corners, Alpine Double Din c/w new speakers & amps.
Muskoka Minute is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page