Parting out a whole lot of Boxsters

[507fan]

Hi,
Do you still have the Rear storage box with speakers on the side=$125+shipping ?
If so, is the carpet black?
Thanks.

[qwerty]

Hi,

I would like to purchase a passenger amber corner piece and all the bolts that hold the door interior trim.

Reference figure 1.

Pelican Technical Article: Boxster Door Panel Removal / Boxster Mirror Switch Replacement - 986 / 987

Note - my door does not have one under the airbag sticker.

Let me know if this is do-able. Thanks.

[itsnotanova]

Originally Posted by eicheldp

I'm looking for a 4 stalk steering column assembly for OBC. Please PM me if you have one available.

Sorry I don't

Originally Posted by Pdwight

I had to access my engine bay this weekend , my cables are quite functional but the ends are worn.....how much for two ?

You're talking about the cables that go from the convertible motor to the transmissions? That red boxster has some top issues, so I might be interested in selling the ones from it, but I'll have to see what condition they are in. $30 shipped if they're good

Originally Posted by Beer

I'm looking for the center radiator duct for a S.

I have one for $40 shipped

Originally Posted by 507fan

Hi,
Do you still have the Rear storage box with speakers on the side=$125+shipping ?
If so, is the carpet black?
Thanks.

Yes I still have the storage box w/speakers. The carpet is black but a little faded. A can of black spray dye can fix that easy.

[CoBeerToad]

I bought my 1997 after the PO did the center console delete. I'd like to undelete it. Do you have a black one?

Part numbers for the bracket and trim covers are (to make sure we're talking about the same thing):

996-552-115-01
996-552-091-02
996.552-092-02

[jmccjr]

Do you still have the black shifter and boot with plastic frame at the base??

[dghii]

Received my parts already! Thank you Woodie!

Good part, very fair price, good communication and quick shipping. Highly recommend using Woodie as a parts source and will certainly purchase more parts as needed!

Thanks again.

[itsnotanova]

Originally Posted by CoBeerToad

I bought my 1997 after the PO did the center console delete. I'd like to undelete it. Do you have a black one?

Part numbers for the bracket and trim covers are (to make sure we're talking about the same thing):

996-552-115-01
996-552-091-02
996.552-092-02

I don't have any that have the double storage. I have about every other kind though. $35+shipping for all three

Originally Posted by jmccjr

Do you still have the black shifter and boot with plastic frame at the base??

I don't have any nice ones

Originally Posted by dghii

Received my parts already! Thank you Woodie!

Good part, very fair price, good communication and quick shipping. Highly recommend using Woodie as a parts source and will certainly purchase more parts as needed!

Thanks again.

Thanks

[CoBeerToad]

Originally Posted by itsnotanova

I don't have any that have the double storage. I have about every other kind though. $35+shipping for all three

I'm not sure exactly what I would need. I'm looking to move the climate control to the bottom to install a double DIN up top. Would I need the double storage?

[particlewave]

Originally Posted by CoBeerToad

I'm not sure exactly what I would need. I'm looking to move the climate control to the bottom to install a double DIN up top. Would I need the double storage?

I have the double storage shelf console only (no side trims, storage bins or front trims) if Woody doesn't.

[itsnotanova]

Originally Posted by qwerty

Hi,

I would like to purchase a passenger amber corner piece and all the bolts that hold the door interior trim.

Reference figure 1.

Pelican Technical Article: Boxster Door Panel Removal / Boxster Mirror Switch Replacement - 986 / 987

Note - my door does not have one under the airbag sticker.

Let me know if this is do-able. Thanks.

Sorry, I missed your post earlier. I don't have any good corner trim right now. PM me your address

Originally Posted by CoBeerToad

I'm not sure exactly what I would need. I'm looking to move the climate control to the bottom to install a double DIN up top. Would I need the double storage?

I have one where the hvac control was down below

[dbansal]

I'm looking for the audio amp (located in frunk) for my 2003 base box. This should be a non bose amp...

[Qmulus]

Originally Posted by CoBeerToad

I bought my 1997 after the PO did the center console delete. I'd like to undelete it. Do you have a black one?

Part numbers for the bracket and trim covers are (to make sure we're talking about the same thing):

996-552-115-01
996-552-091-02
996.552-092-02

If you find those parts will you be selling the console delete stuff? If so, I am interested. I could use the extra leg room.

[itsnotanova]

Originally Posted by dbansal

I'm looking for the audio amp (located in frunk) for my 2003 base box. This should be a non bose amp...

PM me the part number off of yours. I have a few off 98-2001 cars but your 2003 might be different. $35 shipped

[itsnotanova]

I finally got under the 2000 S I have and it looks like the motor has been replaced. Before the cars are shipped to the states, Porsche sprays cosmoline on the undercarriage of the cars. This motor has none and it looks real clean for a car with 90,000. Judging by the dirt on the motor, I'm guessing the motor has between 20-50,000. $3500 as it come out of the car.

Sorry for the short tease, but the motor and trans look to be sold

[Dlirium]

Need a drivers side tail light for a 98/99 base. Got anything?

[cbbepop]

Hi

Im looking for a driver side (left) door panel
Black
with the air bag cover, speaker cover and the leather stitching running across
I think this is the real leather option correct me if I am wrong

Do you have of these door panels lying around?

THanks

[eddy]

Got my parts for the shifter boot! Thanks for helping to improve my car!

[Manuell]

I i live in Katy, Texas. I am looking for both taillights and a shifter boot. If you have wind screens will be nice. Also do you have a not amber front lights?

Thank You

Manuell

[obxwrangler]

you have any ok clutches / pressure plates around for a 1999 boxster 2.5? just looking to put one up in a project car I have to see what I am dealing with motorwise. Dont want to spend on a brand new setup if I have junk engine.shipped to 21795

[Brian0icu812]

looking for a few smaller things but most important is:
-The linkage on 2.5l manuals, that is only about 6in long and is only attached to the trans with the ball clips on both sides (mines wore out and keeps popping of)
-1 black oval for the passenger side ir/alarm thingy in the top center of windsheild
-Any cheap maf's? bought a cheap one off ebay and it now has a miss at idle (again 2.5l)
-Any smoke tail lights? red on bottom, clear or grey on top
-front license plate mount
-the cover for the cabin air filter

Other stuff that might be a possibility if i can afford
-seat memory/trunk release without yellow buttons
-manual cluster 2.5l with approx 80k miles