I tested the AD600S to see if it had any ability to send commands to the DME to activate fans or the cam solenoid. It displayed a message saying that it was not available on this vehicle.
Time for a new laptop Frank or check out one of the higher function units.
__________________ I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
Durametric works fine on win10 home edition with a freebie HP that I sourced from freecycle. That PC won’t run win11 (at least not without some trickery), so can’t personally comment on the .NET situation there.
__________________
Current rides: 2003 Porsche Boxster MT (me), 2019 Bolt LT (me), 2015 Audi Q5 (wife), 2008 VW Rabbit (2.5 inline 5, MT, well, for kid... but you now, it is the 5 straight)
Previous: 2014 Fiat 500e, 2016 KIA Forte5 SX, 2016 Fiat 500X, and some old days: Trabant, Fiat 126p...
Or buy an Enthusiast version with remaining VINs (as they lock it to 3). That is how I got mine at a reasonable price.
Yes, you could, but depending what you need to do, Enthusiast version has limitations.
For example, I had to use Prof version to activate cruise control.
__________________
Current rides: 2003 Porsche Boxster MT (me), 2019 Bolt LT (me), 2015 Audi Q5 (wife), 2008 VW Rabbit (2.5 inline 5, MT, well, for kid... but you now, it is the 5 straight)
Previous: 2014 Fiat 500e, 2016 KIA Forte5 SX, 2016 Fiat 500X, and some old days: Trabant, Fiat 126p...
Just bumping this to the top in case anyone has any opinions on this .. I edited the above post on what i recently found.
very interesting to see such a difference in the general UI as well. from the screenshot showing deviation values to your recent one without. its like its not the same scanner at all. The title of whats being measured to the values being under make it seem like its a drastically different firmware update all together. Im currently looking into getting a scanner that might help me find cam deviation so ill be diving further into these to see what i can find, though im under the assumption the layout of a scanner wouldnt change with a different car / different year
also regarding the car being stored for the winter, is it somewhere its not accessible to test your issue with providing cam deviation values ? might be something to consider doing if it would only work for certain years and above or not at all for a 996 compared to a 986
Just bumping this to the top in case anyone has any opinions on this .. I edited the above post on what i recently found.
Are you just running the report and looking for Cam Deviation in the results?
Try looking at live data on an engine that has been warmed up. In the live data you can search for Cam Deviation if you don't want to scroll through all the data to find it.
__________________ I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
figured id drop this here as good news for the AD600s. decided to say screw it and buy one for next day delivery. setup took no more than 2 minutes and downloaded the porsche specific driver / option to try on my 1999 Boxster. i personally dont care for auto vin so i just quickly selected: manual - 986 boxster and was all set. from there i went to the live data section and searched cam. to my surprise it popped up both banks instantly. not sure what the good values are for cam deviation however mine sat at -6 even after a good drive. needless to say the AD600s is VERY easy to use and porsche 986 friendly. updating was no problem, connected to wifi took seconds, reads codes and live data really well
edit - one thing i DID notice, not a huge issue though something to consider. the OBD port doesnt sit entirely flush with the one in my boxster, meaning it was prone to disconnecting itself very easily and putting a pause to any diag. you will hear a beep if it does so thats good to know in the event that your data suddenly stops. could be why some data for people on this thread may not have been entirely accurate ? not sure just something to add. i still recommend despite that minor thing
Guys, Porsche has always used a unique diagnostic system protocol, which very few have only sporadically gotten thru. This is exactly why the almighty PIWIS system is useless on non-Porsche vehicles, just like the Durametric system. If you want to access and adequately diagnose one of these cars, you need a Porsche specific scan tool, it is the "price of admission" to working on these cars................so that means either jumping $20K for the first year for a PIWIS unit, or a couple hundred bucks for the Durametric system, there is no other way.
__________________
“Anything really new is invented only in one’s youth. Later, one becomes more experienced, more famous – and more stupid.” - Albert Einstein
I'll take one of my Boxsters for a drive tomorrow to warm it up and see if I can duplicate the process I used before. The screen that you are looking at is clearly different from the one I got the readings from.
__________________ I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
I'll take one of my Boxsters for a drive tomorrow to warm it up and see if I can duplicate the process I used before. The screen that you are looking at is clearly different from the one I got the readings from.
thanks, looks like my interface is newer,, if it asks you to update, i wouldn't, in case you end up with the same as mine.
I have also reached out to topdon showing them your screenshot and mine asking what gives. I will report back if they get back to me.
okay i have an update and it is very good news....
Thanks to 78F350 as it gave me exactly what i needed to explain to the tech support guy in China.. I sent them his images and what i was seeing. i also uploaded a log of my device. Apparently it was due to a new android version and all the manufacturers conversion files they had to rewrite because of this.
They quickly sent me a patch file with the corrections and i was able to load it.
I was at Porsche 2.50 and went to Porsche 2.51
so now i am able to read this.
I hope this helps someone in the future...
and now on to the next problem. i will make a seperate post but its a good seat problem.
Parts Car, car parts
Honda Del Sol(s)
"Hers"
My Original '99
The 78 F350
This
That
The S 2.5
Other
Hybrid Mode
