Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 05-15-2022, 09:46 AM   #1
Registered User
 
KevinH1990's Avatar
 
Join Date: Feb 2006
Location: Virginia
Posts: 1,739
I have some observations and questions based on my experience attempting to diagnose and repair my problems. My original problem was actually two problems. The first problem was that the window on the passenger side would not drop when I opened the door from the inside or the outside. The second problem is that the alarm beeps twice about 20 seconds after I lock the car and the red light on the dashboard would illuminate at random times. I noticed the two problems at about the same time and I thought they were caused by the same fault. Now I think that the timing was a coincidence and that I have two separate faults. I base this conclusion on the fact that replacing the door handle microswitch solved the problem with the window drop.

I originally thought that the passenger door lock mechanism was causing the problem with the alarm. I jumped to this conclusion because I pressed against the wiring for the door module when I replaced the door-handle microswitch and it caused the window to drop and the alarm to beep.
Now I am not certain. I scanned the alarm system with my Durametric and the system does not show any fault codes.

Undeterred, I decided to replace the door latch assembly with a VW part. (See post #25.) This did not work at all. I think the electronic components in the VW part are different from those in the Porsche part even though the mechanical part is almost identical. (I note that Pelican sells an URO assembly that does not work on cars with the alarm system, and that may be the issue since my car has the alarm system. https://www.pelicanparts.com/More_Info/8N1837016C.htm?pn=8N1-837-016-C-M253&bt=Y&fs=0&SVSVSI=1044

I did disassemble my lock module and checked for loose solder joints. Although the solder seemed in good condition, I resoldered the connections. I also replaced the microswitch on my original door latch with the microswitch from the VW part. After reinstalling the latch, everything works, but I'm still experiencing the double beep about 20 seconds after locking the door.

I am now expanding my search for the problem. Possibilities include the sensors on:

1. Both doors
2. Both trunks
3. The fuel filler door
4. The center console lid
5. The top latch

I suspect the problem could also be caused by the switch on the dash or the immobilizer itself.

If anyone has suggestions for further trouble shooting, please feel free to post them.

Thanks,
__________________
2000 Arctic Silver/Black, Hard Top, On Board Computer
PNP Rear Speakers, HAES 6-Channel Amp, Avic Z140BH,
Painted Bumperettes, 2004 (OEM) Top, Homelink integrated in dash with Targa switch, 997 Shifter, Carrera Gauge Cluster with silver gauge faces, heated 997 adaptive sports seats, Litronics, silver console
KevinH1990 is online now   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:06 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page