986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)

- Boxster General Discussions (http://986forum.com/forums/boxster-general-discussions/)

- - CEL codes p0300, p0301, p1319, p1313 (http://986forum.com/forums/boxster-general-discussions/75800-cel-codes-p0300-p0301-p1319-p1313.html)

mikesz

07-19-2019 06:02 AM

CEL codes p0300, p0301, p1319, p1313

So I was getting CEL for the SAI. I replaced the check valve, vacuum reservoir, vacuum lines with silicon hoses and just about anything else in the SAI system I could reach. Put car back together. Started car up and no more SAI codes but now getting missfire on cylinder 1 ONLY cylinder 1. CEL codes p0300, p0301, p1319, p1313. I checked the fuel injector for cyl 1 o-ring is fine. Any suggestions?

Anker

07-19-2019 12:33 PM

Check the coil for cracks.

All times are GMT -8. The time now is 10:26 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website