Ben006 in the news!
|
That is awesome, congrats Ben!!!
|
Hey! That's AWESOME! Congrats, Ben! Felicitations! Tres Bien fait!
Sent from my SM-G970U using Tapatalk |
Congrat's! Good to see his hard work recognized!
|
Awesome, Ben!
A+ |
Congrats, Ben.:cheers:
And that was just the start. |
Very cool! :dance:
|
3d metal print
so cool! congrats.
|
Congratulations Ben! :cheers:
|
It’s been nice to watch Ben develop his skills and be a receipiant of Ben’s designs. We’re lucky to have folks like him and all the other very supportive folks on this forum. Well done and well deserved Ben!
|
Toutes nos félicitations! J'espère te voir un jour sur les routes autour d'Antibes
|
Thanks for your comments guys !
And thanks for the support you gave me for the past 5 years ! I haven't been very active on the forum lately... usually, the less active I am, the more I do ^^ I hope to get that part soon ! It's a first for me to create such a big part... Unlike the 9X6 plenums, this one has two big flat surfaces that may be a problem in terms of stiffness. A lot of reinforcing ribs + 3 struts inside should be enough. I'll add provisions for reinforcement from the outside later if needed. I only get one shot on this ! Once it's printed, it will cost me as much as the grant I got, no prototype... get it right on get nothing ! I have updates for you on the plenums, and the shifter side lever ! I'll dyno my car soon, to do a before/after without remapping the DME, just a run with the plenum and 997 TB and a run without ! I'll go talk to the dyno guy Monday afternoon to see with him if I can wrench on my car in his shop (I only need 30min to swap plenums). And for the lever, I have in on the car, and there is just nothing wrong about it :D I just love it ! So, I might get the final production started very soon ! Ben |
|
All times are GMT -8. The time now is 11:28 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website