Anyone also have a 911/997/996 sitting around? 😀
 

I accidentally order a spoiler that is for a 911/997 and maybe a 996 and was wondering if it is going to fit my Z-top. I'm afraid its not going too.

Anyone willing to measure their decklid width, across the bottom and top?

If so thanks in advance.

On my 997:

35” across top (measuring across raisable spoiler)
https://i.postimg.cc/90HbmnmQ/FFF340...6-C6-A0974.jpg

Across the bottom:
https://i.postimg.cc/3NQss1zg/28-D89...64-EAE8711.jpg

Thank you! Much appreciated. I ordered a 1 piece larger copy of the 2 piece spoiler that you have and am hoping it will fit my Z-top. My hatch is 34" across on the bottom edge and gets wider on the way up. I can't say for sure it will work but at least the leg spacing should fit.
Again Thanks!

Looks like it’ll fit then. Good luck!

I still have to see if the angle of the hatch and the spacing of the legs will conform but at least I know the distance between the qtr panels are the same. Looking at other pics it looked like a larger opening. This is what I'm going to try to fit.

Thanks again.

Looks nice! Post up pics after you get it installed!