Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 07-18-2018, 03:32 AM   #1
Registered User
 
Join Date: Jul 2018
Location: UK
Posts: 4
Foam drip tray torn, is it possible to repair

Have discovered finally that cause of water in boxster 986 is both foam drip trays are damaged,has any body ever tried to repair them?

Charliemarlie is offline   Reply With Quote
Old 07-18-2018, 05:58 AM   #2
Motorist & Coffee Drinker
 
78F350's Avatar
 
Join Date: Jul 2014
Location: Oklahoma
Posts: 3,667
Garage
I had a torn window seal on a different car that I repaired about five years ago with 3M silicone weather strip adhesive. It has held up very well and remained flexible. I think it will work in the drip pan if it is just cut/torn and not missing any material.
__________________
I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
78F350 is offline   Reply With Quote
Old 07-18-2018, 06:48 AM   #3
Registered User
 
Join Date: Jun 2017
Location: indiana
Posts: 33
Yes you can use black permatex or silicone sealant to fix the trays. Make sure your drains are clear as well. You can test your repair with a liter of water poured in the tray on each side.make sure the carpet stays dry and the water is draing to the ground.
xzyfsk is offline   Reply With Quote
Old 07-18-2018, 08:24 AM   #4
Registered User
 
Join Date: Apr 2006
Location: Tejas/NorCal
Posts: 201
I was thinking of trying black plasti-dip spray, or maybe even flex seal.
__________________
2001 Lapis Blue Boxster S Tip (stock), 2001 Guards Red Boxster 5-speed (not very stock)
tightbox is offline   Reply With Quote
Old 07-18-2018, 08:55 AM   #5
Registered User
 
Join Date: Dec 2016
Location: Clifton, NJ
Posts: 1,135
eh, depending on how bad it is, its possible to repair. That said, if these things fail, you can end up with an expensive mess with the immobilizer. If its a small cut, seal it, if there are mutliple spots or bigger issues, just replace them.
Quadcammer is offline   Reply With Quote
Old 07-18-2018, 09:29 AM   #6
Registered User
 
seningen's Avatar
 
Join Date: Jul 2008
Location: austin
Posts: 824
I used a silicon sealant, but the trays aren't that expensive if memory serves me (~$20)

Mike
__________________
Drivers: '15 Panamera Hybrid (wife's), ' 01 996 GT2, 00 Boxster S, '96 993 Çab/Tip (wife's)
Race Cars: '75 911 RSR Replica & '99 Spec Boxster
mike@lonestarrpm.com
seningen is offline   Reply With Quote
Old 07-18-2018, 03:39 PM   #7
Registered User
 
oldskool73's Avatar
 
Join Date: May 2015
Location: Sydney, Australia
Posts: 335
I just used waterproof duct tape to patch, looks like **************** but has held up ok
oldskool73 is offline   Reply With Quote
Old 07-18-2018, 06:13 PM   #8
Registered User
 
Join Date: Mar 2014
Location: Eastern NC
Posts: 695
Garage
Quote:
Originally Posted by seningen View Post
I used a silicon sealant, but the trays aren't that expensive if memory serves me (~$20)

Mike
I did the same with some tears and punctures. Worked great.
__________________
"YouTube Certified in Various Specialties"
BFeller is offline   Reply With Quote
Old 07-19-2018, 09:30 PM   #9
Registered User
 
Join Date: Feb 2017
Location: CO
Posts: 989
Quote:
Originally Posted by Quadcammer View Post
eh, depending on how bad it is, its possible to repair. That said, if these things fail, you can end up with an expensive mess with the immobilizer. If its a small cut, seal it, if there are mutliple spots or bigger issues, just replace them.
I’m with QC on this one. Given the potential severity of a failure, and the fact it’s a cheap replacement, a repair would only be a stop gap to replacing for me. Unless of course it was a very, very minor tear. While this one doesn’t stack up to an IMS, piece of mind, it’s kind of close. Water gets in your immobilizer and it’s game over till it’s fixed/replaced. WAY more a PITA and much more expensive than a simple little foam tray...

Geof3 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:53 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page