986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Boxster General Discussions (http://986forum.com/forums/boxster-general-discussions/)
-   -   If it ain't broke... (http://986forum.com/forums/boxster-general-discussions/69425-if-aint-broke.html)

I_like_tacos 10-11-2017 01:07 AM

If it ain't broke...
 
I was curious as to everyone's thoughts here. This goes for not only Porsche, but all cars. I am a firm believer of the "if it ain't broke, don't ix it" philosophy. However, I do my routine maintenance. (oil changes, tire rotations, etc.)
My 2004 base is due for brake fluid change, mtf change, spark plugs, etc. The car is running great and I'm a little concered that my good intentions may cause a problem to pop us somewhere.
Am I being paranoid? Anyone else share my concerns?

That986 10-11-2017 02:20 AM

Sorry, you're scared doing routine maintenance will make other problems appear?

I_like_tacos 10-11-2017 02:36 AM

I guess so. I'm wonering if the benifits outweigh the risks. For example, bleeding the brakes and accidently trapping air in the system. I've been doing my own work for years and have faith in my mechanical abilities, however sometimes things just break when you touch them. Especially on a 14 year old car. (though maybe the age of the vehicle is exactly why I should do the scheduled maint)

That986 10-11-2017 02:59 AM

You need to chill out a bit and stop worrying so much.

I_like_tacos 10-11-2017 03:25 AM

haha. Maybe you're right.

DWBOX2000 10-11-2017 04:31 AM

I get your concern. Things break that weren't even a consideration at the beginning of the project. Example, bolt snapping. I will still plow ahead though.

78F350 10-11-2017 04:56 AM

I broke a jammed brake bleeder valve when I serviced the brakes on an old BMW. It sucked and for a moment I wished I had never started the job. However, waiting another year would not have made it any better and the brakes need to be flushed. If it had been done regularly over the years, it probably wouldn't have broke.

edc 10-11-2017 05:06 AM

If t ain't broke ... Then it probably will later. It's just a matter of when most of the time rather than if and estimating how long you can go before replacement.

Also if it ain't broke ... It might be pretty worn out and give resulting in a below par car. This is especially true for suspension. The parts rarely get to a failure point where the car is undriveable but you can be driving a worn out car for a long time as worn parts don't necessarily stop the thing moving.

For me all this means replacing parts that are not broken. A Porsche is about great handling and breaking not mediocre handling and braking.

That986 10-11-2017 07:09 AM

Quote:

Originally Posted by edc (Post 552095)
If t ain't broke ... Then it probably will later. It's just a matter of when most of the time rather than if and estimating how long you can go before replacement.

Also if it ain't broke ... It might be pretty worn out and give resulting in a below par car. This is especially true for suspension. The parts rarely get to a failure point where the car is undriveable but you can be driving a worn out car for a long time as worn parts don't necessarily stop the thing moving.

For me all this means replacing parts that are not broken. A Porsche is about great handling and breaking not mediocre handling and braking.

Bloody hell, make the man more paranoid why don't you?

newcider 10-11-2017 07:37 AM

I'm a bit concerned about changing the spark plugs this winter while the car is "mothballed".
It only has 42k miles but it's a 2004 and may NEVER have had plugs changed!
Fear #1- plugs have seized in aluminum threads
Fear #2- cause oil leak while I'm beating on recalcitrant plugs
Fear #3- what Porsche dealer will charge to do it for me

husker boxster 10-11-2017 07:38 AM

When dealing with bolts and nuts on older cars, it's always a good practice to shoot them the day before with your favorite penetrating oil so it has some time to do its work.

If you don't have a favorite, Kroil is very good.

dghii 10-11-2017 08:46 AM

To the OP:
I truly understand your concerns but changing fluids is something that will help give your car a very long life. Follow the maintenance schedule....MTF at 90K, Brake fluid every 2 years. Add in doing the coolant (I choose 60K miles). These cars are very straight forward to work on. Thing is, by doing the preventative maintenance, you might head off other things.

Example: You may want to do your WP and thermostat when you decide to change coolant. When I did the WP, I pulled my motor mount and inspected for cracks. When you're under the car, you can look for things like CV boot cracks and leaks. When doing brakes, you can inspect suspension and steering components for wear. It give you a chance to do things on your time, get good advice on the repairs and shop for deals on parts.

I_like_tacos 10-11-2017 12:04 PM

I appreciate everyone's input. Glad I'm not alone with these concerns. However, I suppose I'll just have to do the maintenance and take any problems as they come. Maybe I'll pick up the service manual. Thanks again everyone! :cheers:

xzyfsk 10-11-2017 12:47 PM

I just replaced the original plugs in my 2003. That made a big difference on how the car runs. The plugs were shot to say the least. I would change them if I were you. It is not that big of a job.

RandallNeighbour 10-11-2017 01:51 PM

Get a Motive Power Bleeder for the brake lines. It makes bleeding the brake lines super easy to do by yourself.

And if you're changing the water pump and thermostat and the coolant, you're right there to change the front motor mount.

Ah what a slippery slope this maintenance thing is!

paulofto 10-11-2017 04:54 PM

Quote:

Originally Posted by xzyfsk (Post 552140)
I just replaced the original plugs in my 2003. That made a big difference on how the car runs. The plugs were shot to say the least. I would change them if I were you. It is not that big of a job.

+1 on changing plugs at 60K miles

dghii 10-11-2017 05:02 PM

At this point, one of the things that makes me hesitant to purchase a newer used car it that I know what I've done (and not done) to mine. Gotta be worth something!

Jamesp 10-11-2017 05:26 PM

Quote:

Originally Posted by husker boxster (Post 552113)
When dealing with bolts and nuts on older cars, it's always a good practice to shoot them the day before with your favorite penetrating oil so it has some time to do its work.

If you don't have a favorite, Kroil is very good.

+1 - And more time sitting with penetrating oil is better. Several days with several applications and it will seep into the threads.


All times are GMT -8. The time now is 05:08 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website