![]() |
Broken sun visor mirror lids?
Was wiping down my interior, and when I opened the driver's side sun visor mirror lid, it snapped off! Wow, this thing is cheap. Luckily, I had an entire spare set of sun visors that I bought used from eBay years ago when the pass side visor wouldn't stay folded up. Does this thin plastic just break down from sun or heat damage? Anything to apply that will make em last longer? The mirror cover literally disintegrated.
http://i869.photobucket.com/albums/a...psxk8sgbsm.jpg |
Quote:
I found that the lids from the non-illuminated ones fit the illuminated ones just fine (and work great). There's about $100 difference (at least when I bought the one for the missing lid for my driver side visor. $36 vs $136 or something crazy like that (you can't just get the lid, you have to buy the whole mirror assembly). At the time I found Pelican had the best price for new ones. I then used a razor to cut the pivot post on the new (non illuminated) mirror assembly and moved the lid over to my illuminated one. You place the lid over the pivot posts on the mirror assembly and press straight down. The posts are cut at an angle to make it easy to install the lid, but it's really hard to get them off without damaging the lid which is why i used the razor to cut the post on the new mirror to release the lid. The new lids also have different (SUPER FUGLY) warning stickers on them. I chose to remove them while I had the mirror out. Isopropyl alcohol removed about 99% of the stickers and then I shot the entire visor with Dupli-Color black carpet/vinyl paint. You'd never know there were warning stickers on them. It looks a million times better with the top down. |
Thanks man. I'm ok for now cause I had an extra sun visor, but I'm sure the cover will snap off again in the future. Good to know there's an easy replacement.
Quote:
|
I bought one recently bought one from my local dealer for $89 with the PCA discount. They had the option to get it with or without the sticker. I chose pose one without. I've replaced three of these over the years on my 986 and 996.
|
Quote:
|
Quote:
|
Quote:
|
Just an FYI. I replaced my drivers side complete visor with a used one because it kept falling down when driving. Be careful if you replace it not to pinch the wiring behind it like I did and causing a short. I kept blowing the 15 amp fuse for the convertible top micro-switch and whatever else was on that fuse until I figured out what I did. It drove me crazy for a few weeks until I discovered what happened. I can't believe I did that, but I did.
|
Quote:
|
Quote:
Quote:
|
|
Interesting. Why did you delete them? I find them useful sometimes still, even though they don't rotate.
|
Quote:
|
Quote:
|
Quote:
|
Funny this subject came up. I broke off my driver side about 1/2 hr ago..(with lights)
|
Quote:
|
Darn thread. Opened mine up today to check it, broke off in my hand 🙄
|
Quote:
|
Both of mine are toast. Driver's went when I was going to replace the bulbs with LEDs. A sign, if you will. :D
|
Found my covers in rear pouch behind driver seat, and yes, both were broken
Thinking we are better off without them Sorry I can't help with any preservation tips |
Both of mine are good now. I think I'll just never open the flaps again so as to preserve them. Lol.
|
Quote:
Im just glad I wasn't reading the "all Boxsters blow up" thread before I went out there 😲 |
Quote:
|
All times are GMT -8. The time now is 08:35 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website