Oil Filter - 986 Forum - The Community for Porsche Boxster & Cayman Owners

cribfiller · 03-13-2017, 08:00 AM

Last weekend I picked up some Castrol Synthetic at the local auto parts store, they were running a special of five qts. @ $28.00, and it included a K&N oil filter. I got two of the jugs, and automatically got two oil filters. Not sure if I will use these in the car as I usually use the Mahle or Hengst from Pelican. Are these comparable to those?

Benitom · 03-13-2017, 08:12 AM

Quote:

Originally Posted by cribfiller

Last weekend I picked up some Castrol Synthetic at the local auto parts store, they were running a special of five qts. @ $28.00, and it included a K&N oil filter. I got two of the jugs, and automatically got two oil filters. Not sure if I will use these in the car as I usually use the Mahle or Hengst from Pelican. Are these comparable to those?

Personally I never used K&N oil filters but per reviews I've read online they feel cheap compared to OEM, Mahle and Hengst. I always use Hengst from Pelican Parts but really it's just to save a couple bucks. My dad is a retired Toyota mechanic so OEM was preached to me my whole life.

Deserion · 03-13-2017, 08:42 AM

If their oil filters are anything like their air filters... then hell to the no no.

WorkInProgressK · 03-13-2017, 09:11 AM

Quote:

Originally Posted by Deserion

If their oil filters are anything like their air filters... then hell to the no no.

Pre-oiled. :P

paulofto · 03-13-2017, 10:13 AM

I've used Mahle, Hengst, Fram and K&N at one time or other. There is a K&N in the car now. I've never seen a difference. What would you see if there was a difference? Other than the colour of the filter material they all look the same. They look even more the same when they are used.

cribfiller · 03-13-2017, 02:23 PM

Thanks for the comments, for now I will put them in the storage box and make the call when I change the oil. I might just do a filter change mid summer to keep an eye on things.

mikefocke · 03-13-2017, 05:48 PM

Who among us knows the specs enough to be able to be confident of the difference. What would they be anyway? I suppose microns to measure the porosity, some gph figure to show the amount of oil that would pass through at some industry standard pressure?