986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Boxster General Discussions (http://986forum.com/forums/boxster-general-discussions/)
-   -   Indy Shop (http://986forum.com/forums/boxster-general-discussions/60746-indy-shop.html)

Muskoka Minute 03-09-2016 05:21 PM

Indy Shop
 
Hi Guys

Does anyone know of a good Indy shop in Vaughn?

After reading on the forum it seams that the dealer may not have
your best interest in mind. (Do the best inspection)
I understand that they are a business but I would assume that they don't want to
start screwing with guys.

Anyway I would like to take my car to get checked out.

On a side note I bought the car from Pffaf (Porsche Dealer) does any one have any good, bad or in between to say about them?

Thanks Bart

boxxster 03-10-2016 03:09 AM

Have a look here at some of the PCA approved shops.

Technical Inspection Forms & Centres | PCA UCR

The Radium King 03-10-2016 03:47 AM

don't mean to send you away from this board, but if you want regional information, the rennlist Canada region forum sees a lot of traffic and has a lot of info like you are looking for.

dxterity 03-11-2016 10:19 AM

Hey Bart

This probably doesn't help much but with the lack of responses so far, you might want to try this guy in East York (wrong side of town, I know). I've used him to resurrect my Boxster from an extended hibernation and I was very happy with the results. He's a certified Porsche mechanic.
Check out his website: Toronto Porsche Repair & Service -European- GTEK Automotive, Toronto, GTA - Porsche

Giller 03-11-2016 12:06 PM

If you are up for a bit more of a drive - there are a couple shops in Kitchener-Waterloo that are solid. Have heard tons of good things about Furtmair - although he is a bit more expensive. There is also Mike at German Autotech - that's who I use and get fantastic service at decent prices. (It's a Porsche, it's still more than your average Ford shop).

Giller 03-11-2016 12:07 PM

And....if you join the PCA Upper Canada Region - you have access to their forums - I'm sure there is someone in your area in the PCA who could advise.

crooster 03-12-2016 03:06 PM

+1 on both Mike at German Autotech and Uli Furtmair. I use Mike now but I have used Uli as well in the past. Both are good choices. I hear good things about Courtney at EU Autoworks from other PCA UCR members.


All times are GMT -8. The time now is 11:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website