986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Boxster General Discussions (http://986forum.com/forums/boxster-general-discussions/)
-   -   stuck fuel filler door ! Help please (http://986forum.com/forums/boxster-general-discussions/60355-stuck-fuel-filler-door-help-please.html)

rfuerst911sc 02-06-2016 02:28 AM

stuck fuel filler door ! Help please
 
For whatever reason the locking mechanism on my 02 S is stuck in the locked position. Last week at the gas station I was able to hit the lock/unlock button on the dash several times and was able to get the door open. I'm at a half a tank and will have to fill her up this weekend. Last night in the garage I locked/unlocked several times and could NOT get the door open. I did a search for fuel door and stuck fuel door and came up empty.

1.So is there an override or mechanical way to get the fuel door open without damaging anything ?
2.Once I get it open should I attempt to spray WD40 or similar to lubricate the lock rod ?
3.The car currently does not have the OEM ECM or immobilizer in it I'm running on a borrowed unit until mine comes back from repair. So I can't use the key FOB to unlock the car. I have to manually unlock the car and fire her up before the alarm goes off. I asked Jake if he thought this was the reason for the fuel door issue and he thought no it's just a stuck door. He probably is right but I thought I would throw that fact out there.

Any advice/help is appreciated as I have to feed the beast !:D

KevinH1990 02-06-2016 03:09 AM

http://986forum.com/forums/general-discussions/29149-cant-open-fuel-door.html

This thread mentions several possible solutions.

I hope one works for you.

rfuerst911sc 02-06-2016 03:16 AM

Haha I just found that link by searching on the web. I had forgotten about the manual cable in the passenger fender. I will try that as a temporary work around. Thanks :cheers:

cornontherob 02-06-2016 12:38 PM

If you have a durametric cable, then try unlocking it through the interface.


All times are GMT -8. The time now is 05:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website