CR220 to CDC-3 wire harness part number needed - 986 Forum - The Community for Porsche Boxster & Cayman Owners

JonnyBGood · 11-21-2003, 05:38 PM

Does anyone have a part number for the wire harness that connects the CR220 to a CDC-3? I just bought a CDC-3, but I didn't get a wire harness.

Thanks.

JBG

Larry Goldston · 11-22-2003, 03:24 AM

JBG, I think if you contact the guys at SWstereo specialists at 1-800-270-best, they can help. They have offered me great service and the products I've bought from them, were as discussed. The other ideas is any 200K size town has a Harman Stereo dealer and since all oem Porsche radios etc are made by Harman (becker) they might be able to help you locally. Good luck Larry

Tool Pants · 11-22-2003, 08:12 AM

The cable from the back of the radio head can be purchased from Becker or Porsche. The Becker cable is a bit longer but we coil the excess next to the battery, and it does not have a gromet but the gromet has not real purpose.

From Porsche 993 645 453 00. I have the Becker part number somewhere but I can't find it. If you call Becker just tell them it is for a Silverstone changer. The Becker price is about the same if you shop around with the Porsche dealers, about out $80 when I checked out last year when one of our local guys bought a changer off ebay that did not have the cable. Jeff

JonnyBGood · 11-23-2003, 04:12 AM

Thanks Jeff. I called SWstereo and they wanted 95 and told me that the dealers want 175 for it. I actually checked my battery compartment, and low and behold, there was the end of the cable. So apparently, my car HAD a cd changer, and someone removed it before it was sold to me.

Regardless, thanks for all the help. Now, do you know what magazine from sony will fit the CDC-3. I've seen it posted somewhere, but can't remember where.

Thanks again,

JBG

Tool Pants · 11-23-2003, 07:27 AM

Sony XA-T6. Bought some from the Good Guys and Crutchfield for about $35.

JonnyBGood · 11-23-2003, 11:03 AM

Thanks again Jeff.

You wouldn't happen to have a picture of the U clip that you need to mount the CDC-3 do you?

Tool Pants · 11-24-2003, 02:03 AM

I do not have a close up picture of the clips. If my picture shows up just above the right radio removal key are the 2 clips. Part number 999 507 532 02.