Ebay Wheel Crests

[Deserion]

Originally Posted by Giller

Since we are talking a bit about quality - it is good to note that although the lower cost caps do fade (hitting them with some clearcoat does slow the fading) the OEM parts are not perfect. Two years ago rims were replaced and new OEM centre caps were installed (by previous owner). In those two years, two of the centre caps lost their logo. If you search on this forum, you will find this is not uncommon. Therefore, not sure how much higher quality the OEM caps are?

A very valid point. One of my caps has lost the crest due to the adhesive letting go. I used to see this frequently with VW center caps in the late 1990s/early 2000s. My mom's 987 has center caps like the ones in the OP (except OE in silver), and are still looking quite minty. The caps on my dad's 964 are the all-silver debossed variety.

When I replace mine they'll be the newer style without the crest glued on.

[cardiffgiant]

wow, emotions are running high in the wheel cap thread!

mine were faded, and it looked like some punks had removed the crest from two of the caps with a screw driver or knife when a previous owner had the car. My turbo twists didn't look all that hot, so I got a new cheap pair on ebay and then plastidipped the wheels.

They look good. They cost $15. Replacing them every now and then if they fade or chip won't be a big deal.

[b55er]

My issue with the fakes are some sellers representing them as OEM at a price slightly lower than OEM, with some people getting ripped off thinking that they bought OEM.

If the selling price is $16 for 4, I'm pretty aware that they are fake and I'm okay with that. If a seller represents that they are OEM, cost $100+ or so, and are counterfeit, that's just wrong.

[Rob175]

I saw some gold/black/red shields on Ebay the adhere over the existing B&W shields. Has anyone purchased them?

Also, I see some full replacement caps are listed as 75mm while others are listed to be 76mm...... anyone know which my 89' Boxster (non S) with stock wheels uses?

Thanks

[particlewave]

Originally Posted by Rob175

I saw some gold/black/red shields on Ebay the adhere over the existing B&W shields. Has anyone purchased them?

Also, I see some full replacement caps are listed as 75mm while others are listed to be 76mm...... anyone know which my 89' Boxster (non S) with stock wheels uses?

Thanks

Assuming that you mean '99, you want 76mm.

[Rob175]

It was a typo... I meant to type 98'.

Just bought a set (silver w/colored logo) off Amazon for $10 (new)....I'll spray some clear sealer on them and hope for the best. Since my Boxster is a "summer car" it only sees warm sunny weather so I'm hoping for fairly long wear.....lol....but then again you get what you pay for and at $10 a set I'm not expecting "years and years"....lol

The other type I was looking at were just metal shields with foam tape on the reverse side. My concern was that they would fall off in time, or just look weird since they would be raised.