Brake fluid light on
Brake fluid light is on but fluid level fine. Brake fluid fine. Recently flushed no air. Suspect stuck sensor. Any suggestions. Brake work fine ABS failure also on.
|
Add fluid till the light goes out.
|
Fluid is not the problem. Tank is full and system has been bled. No air. It is a sensor issue.
|
The light is a "brakes need service" light so check pads and fluid. A worn or grounded pad wear sensor will also trip the light.
|
Brakes, pads and rotors very new and were working fine until car sat for several months and the battery went dead. Now abs has a 4270 code and brake fluid light on even after bleeding again.
|
Check the sensors.. if they werent replaced with the pads. Also, my car has the on-board computer which has a separate warning for low brake fluid.... ask me how i know
|
All times are GMT -8. The time now is 07:27 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website