[QUOTE=grc0456;501092]Heiko to the rescue!


Sent from my iPad using Tapatalk[/QUOTE...


Gosh I hope so !!!!!!


I need a hero right now !!!

LMAO - none of those look like the right code.... not even close
Try 0938 1st and 0936 second... let me know if it doesn't work!
Heiko

Boxster RADIO CODE . . . help . . . . ?
 

Hi,
2000 Boxster S (LOVE THIS CAR!!!), just experienced a battery-change with an annoying side-effect . . . hostage-taking radio.
Tried 10 different codes . . .ugh
I BEG for help . . . .
Serial Y5042726
Thanks . . . :-)
Tomek

8501 should work for you
:D
H

Heiko!!!
YOU ARE MY HERO!!!!!!!!
THANK YOU a million times . . . the code worked and life is good again!
All best to you!
Tomek

Glad to help :cheers:

lost radio Code
 

Hi There,
Cab anyone please help with a lost radio code for the following;

1997 Boxster
Bleaker radio Model CDR 210

S/n V5007231

Many Thanks in advance.

Try 1032 or 1022 if 1032 doesn't work :D
Heiko

And yet another lost Boxster radio code.........
 

I am a 'newbee' to this forum so please be gentle!!!!

I have read the above posts but don't see an answer to my specific problem.
My radio is a CR220, Becker 1, 4362, s.n. W5002947. I also have the remote CD changer.
Like everyone else, after changing batteries, I lost the radio code. I got the 4 **** and foolishly tried to enter a code which was incorrect. The wait message had now been displayed for HOURS, not allowing another code to be entered.

I would love to have the Correct code for my radio. Also, if anyone know a trick to resetting the message on the radio face, I would appreciate it. I tried to remove the battery cable again, but that did not luck. :( :confused:

My Boxster is a 2000. Thanks for the help!

Try 4607 first and if that doesn't work use 4605... one of those two codes should work.
Heiko

Thank you very much! Any idea on resetting the Wait message? Like I said, it has been hours?

Radio code
 

Battery died. I don't use the radio much, I like the engine sound ant higher revs but it is nice to have
Vin WPOCB2986YU662150 cdr 220
Thanks
Patrick

Make sure your battery is charged and leave the radio on for as long as 24hrs. If you've entered the wrong code more then once the time might get longer on some units.
But either way the unit has to be 'ON' in order to get past the timer....
H

I need the serial number for the CDR220 in order to get you the code.
H

Radio code
 

where do I find the serial #???
If I need to remove the radio how does one do that??? Dempsey mentions special tools
thanks
Pat

CDR 220
• Turn off unit
• Push and hold the TP button for at least 8 seconds.
•Turn the unit on.... 'Becker 1' will show on display
• Rotate the right selector knob to display serial number


CR 210
• Press tone, then press 8 and 0 simultaneously 'Becker' appears
• Press station up arrow on right 'PR-VERS' appears
• Press one of the number buttons below display, directly below the LCD arrowheads
• The model number will appear
• Press station up arrow on right until, 'SERIAL N' appears
• Press the numbered button again
• The serial number will appear

Sup guys I was wondering if you guys could help me with a radio code issue. Mines a 220 serial code is 15002106 type 4362. Also do you know why when I turn on the radio it just has me waiting forever ? I can't type any ode anymore even if I turn it on and back off after a while? Thank you in advance !!

Hi I need to disconnect the battery and do not have the code to activate the radio.
Becker type 1 4362
Ser: x5017231


Thanks in advance.

I sent you a reply to your PM
:-)
H

Thank you heiko!!!
 

Many, many thanks. The info and code you provided worked great. Saved me a lot of anguish!:cheers:http://986forum.com/forums/uploads02...1469156444.jpg

Excellent - glad you got it working again :cheers:
Have a great weekend
Heiko

lost my radio :(
 

Dear all,

I'm looking for my card code all over but can't find it :(
I hope someone would help me as I have to wait till the 15th of August for having an apointment at my dealer :eek:

Hereby the serial:

x5015638
type 4467

Thanks in advance for all the help proposed :)

0563 should get your radio going :)

Heiko

your my hero Heiko :D
thank you sooooo much.

LOL you're welcome - have a great weekend
Heiko

cr 220
 

Hi,
My CR 220 serial# X5020441 needs code
Thank you
Pat

Also need code.
 

As someone else posted I prefer listening to the vehicle over the radio. Just to show how often I actually turn it on, it was 3 months ago the battery died and I had to replace it. I recently took a 2 hour trip and decided to try out the radio and CD player and that's when I realized I needed a code. Prior to the battery going dead it did work because I put some CD's in the remote changer and tried it out. Anyhow, I have the CDR-220 and I just tried what someone suggested to obtain the serial number and that didn't work at all. Unit powers up with PORSCHE displayed, then asks for code. I have the radio manual and obviously the code card is missing. It is a 2001 Boxster S. Any suggestions short of going to the dealer would be appreciated.

Just got my serial number
 

I have a CDR-220. Turn the unit on, press and hold TP for 8-10 seconds then you'll hear a beep and it'll display Becker 1, turn right dial to obtain serial number.

My serial number is - Y5051542, model 4462. Anyone help with a radio code?

Try 1051 first and if that doesn't work try 0051.
Heiko

Try 5034 1st and if that doesn't work try 5032 and 3rd and last choice is 5132.... hopefully the first one will work though :-)
Heiko

hi
 

Hello,can you help me with a code for a becker cdr-22 4467 sn x5016148 ? :(

0548 should do the trick for your cdr-22
H

Becker CDR22
 

Hello everyone, Porsche have given me a code for my CDR22 of 3032 but its not working.

After changing the battery I need the code ! type 4467 serial W5002 102

Can anybody help please !

Thank you for the code
 

1051 Worked!

If your serial is correct W5002102... then your code is 0436
Heiko

:D I'm glad it worked.
Heiko

Thank you Heiko
 

It worked. Much appreciated

thanks for the radio code
 

Heiko.
Thanks for the radio code
First option worked.
Pat

No problem - anytime :)

:) glad it worked
Cheers
H