986 Forum - The Community for Porsche Boxster & Cayman Owners

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Boxster General Discussions (http://986forum.com/forums/boxster-general-discussions/)
-   -   '01 to '03 Gauge Swap. Doable? (http://986forum.com/forums/boxster-general-discussions/43497-01-03-gauge-swap-doable.html)

coolbreeze551 03-25-2013 10:02 AM

Quote:

Originally Posted by KevinH1990 (Post 333289)
If you and I are ever in Denver, we should take Gavin to dinner. Without his help, I would have had a cluster that cost $155 serving as a paperweight.

Thanks for hanging in there and dealing with the differences between the old and new clusters. Chris Zang's warning about the differences proved accurate. Fortunately Gavin's basic method works on both types of cluster.

Absolutely!

Steve Tinker 03-25-2013 09:42 PM

As a point of reference, what oil pressure does the M96 engine run at hot >@ 3000rpm?
Is there a difference in pressures between the 2,5/2,7/3,2 l engines?

KevinH1990 03-26-2013 03:12 AM

The only reference I could find was a 2003 996 owner's manual. It said the pressure should be approximately 3.5 bar at 5000 rpm with a fully warmed up engine. It seems like my 2.7 runs at about that level.

For the volt meter the normal range is 12-16 volts. If it is below 12 with the engine running, you should "have the charging system checked at an authorized Porsche dealer."


All times are GMT -8. The time now is 04:38 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website