Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 02-11-2013, 06:17 AM   #1
Registered User
 
Join Date: Feb 2013
Location: San Antonio, Texas
Posts: 24
Just bought a Boxster 2000 S

Hi everyone,


My name is Thomas. I am totally new to the Boxster, but not new to Porsche. Recently I had the opportunity to by a 2000 S. I really love this car, but don't yet know much about it. I was referred to this forum by the guys at 914world.com.

I started this conversation with them over there, having a lot of trust in that forum, as I have owned a 914 for a long time, having recently restored it. Rather than repeating everything, here is a link to the discussion prior/after I bought the car.

914World.com - A Porsche 914 Community / Forum / Club

Of course, I would like to continue this conversation over here.

I must say, I really love the crap out of this car. Of course, it is night and day from my 1973 mid engined Porsche, but there are similarities. I don't feel totally foreign in the car. By the way, any 914 owners over here?

Anyway, I will of course do some searches before I ask repeated questions.

But I wanted to introduce myself, and hopefully I will find this forum to be helpful.

I always liked the Boxster, just for it's looks, even when there was just the Boxster prototype. Now that I have one, I am really in love with it. The sound of the engine, so smooth and powerful!

Thomas

thomasotten is offline   Reply With Quote
Old 02-11-2013, 05:25 PM   #2
Registered User
 
BruceH's Avatar
 
Join Date: Jun 2012
Location: Bedford, TX
Posts: 2,708
Garage
Welcome to the forum Thomas! Lots of great information on here and a great group of enthusiasts! Oh, and we like pictures
__________________
______________________________________________
2001 Boxster S Lapis Blue
TS Cat Bypass Pipes and exhaust
iPad Mini Dash Install
DEPO Tail Lights
BruceH is offline   Reply With Quote
Old 02-11-2013, 05:40 PM   #3
Registered User
 
Join Date: May 2012
Location: Northern California
Posts: 319
Garage
Welcome Thomas! Former 914 owner here as well (1970 with more than a few tweeks). Enjoy your new pride & joy & ask lots of questions, oh and pics are always good stuff.
Bryan topping is offline   Reply With Quote
Old 02-11-2013, 06:17 PM   #4
Registered User
 
Join Date: Feb 2013
Location: San Antonio, Texas
Posts: 24
Ims

Thanks for the welcome. I come here, of course, also seeking IMS peace of mind. Obtainable?
thomasotten is offline   Reply With Quote
Old 02-11-2013, 06:25 PM   #5
Registered User
 
BYprodriver's Avatar
 
Join Date: Oct 2008
Location: O.C. CA
Posts: 3,709
Garage
Quote:
Originally Posted by thomasotten View Post
Thanks for the welcome. I come here, of course, also seeking IMS peace of mind. Obtainable?
Hi Thomas, don't settle for rumours & idle theory go straight to the source:

lnengineering.com
BYprodriver is offline   Reply With Quote
Old 02-11-2013, 06:39 PM   #6
Registered User
 
Join Date: Feb 2013
Location: San Antonio, Texas
Posts: 24
Yes. lnengineering make good products. I just watched their IMS video. About how many hours is this procedure? I am pretty handy.
thomasotten is offline   Reply With Quote
Old 02-11-2013, 06:46 PM   #7
Registered User
 
BYprodriver's Avatar
 
Join Date: Oct 2008
Location: O.C. CA
Posts: 3,709
Garage
Quote:
Originally Posted by thomasotten View Post
Hi everyone,


Rather than repeating everything,

Anyway, I will of course do some searches before I ask repeated questions.
Thomas
BYprodriver is offline   Reply With Quote
Old 02-11-2013, 07:01 PM   #8
Registered User
 
Join Date: Feb 2013
Location: San Antonio, Texas
Posts: 24
Well, I guess there is one in every forum. If you must know, I spent the last few hours searching and reading about the procedure but I did not see a time estimate. Sorry that I ventured to ask a simple question without first using the search function. Thanks to everyone else for the heartfelt welcome.

Quote:
Originally Posted by BYprodriver View Post
thomasotten is offline   Reply With Quote
Old 02-11-2013, 07:49 PM   #9
Moderator
 
Join Date: Feb 2012
Location: DFW
Posts: 782
Garage
Water under the bridge! And welcome to the forum! Texas has a lot of Boxster owners that frequent the forum, and quite a few San Antonio members. Yee Haw!
Kenny Boxster is offline   Reply With Quote
Old 02-11-2013, 08:08 PM   #10
Registered User
 
Join Date: Jun 2012
Location: Milwaukee, WI
Posts: 383
Welcome to the forum and the club. Any more pics to share?
dbear61 is offline   Reply With Quote
Old 02-11-2013, 08:22 PM   #11
Registered User
 
mcomet's Avatar
 
Join Date: May 2012
Location: Concord, CA
Posts: 271
Welcome to the forum. You might already know about the "101 projects for your boxster" book, if not you will probably want to order it if you are a DIY person.
101 Projects for Your Porsche Boxster

I had dealer do my transmission / IMS but I know it is a pretty involved job...I think 2 days for dealer ? Can't recall...
__________________
Michael Comet - www.comet-cartoons.com
2014 Guards Red Cayman S - PSE - PASM - 20"CC - INFTMT - CONV - etc..etc...
SOLD - 2003 Speed Yellow Porsche Boxster S - LNE IMS - Klisstle Rollbar Cover
mcomet is offline   Reply With Quote
Old 02-12-2013, 04:27 AM   #12
Registered User
 
Join Date: Feb 2013
Location: San Antonio, Texas
Posts: 24
Dealer IMS

I take it the 101 Projects for your Boxster has enough things that are not already posted on Pelican website to make the book not just a printed version of the website tech articles?

IMS by dealer: Am I to understand that the Porsche dealer will install aftermarket IMS bearings such as LN Engineering's verion?
thomasotten is offline   Reply With Quote
Old 02-12-2013, 05:14 AM   #13
Registered User
 
mcomet's Avatar
 
Join Date: May 2012
Location: Concord, CA
Posts: 271
I would say yes it has more tho a lot of basic stuff and good pics are online. So depends on what you want to do. I don't think every project is online. If you post in the DIY forum here I think most people recommend the book plus the Bentley service manual plus online resources.

As for LN bearing yes. I have never heard of a dealer NOT doing that upgrade when a transmission / clutch was replaced.... Unless someone didn't want to pay a little extra for it. But heck my dealer out here actually has a clutch "special deal" pricing that specifically includes the LN bearing. Heh
__________________
Michael Comet - www.comet-cartoons.com
2014 Guards Red Cayman S - PSE - PASM - 20"CC - INFTMT - CONV - etc..etc...
SOLD - 2003 Speed Yellow Porsche Boxster S - LNE IMS - Klisstle Rollbar Cover
mcomet is offline   Reply With Quote
Old 02-12-2013, 05:51 AM   #14
Registered User
 
Join Date: Jan 2009
Location: kansas
Posts: 447
Garage
Welcome! I have a '00S also. Love it!
SeanZ4 is offline   Reply With Quote
Old 02-12-2013, 08:17 AM   #15
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
Welcome.

My only experience with 914's was seeing them at nearly every PCA autocross. Unfortunately not in a good way. I'd say it was 50/50 odds that one would break down during a session, causing a long delay, pile up of cars queing up, and probably spilling some slippery juice on the course. Left me with the impression that Porsche's evolved because owners needed durability.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW
Perfectlap is offline   Reply With Quote
Old 02-12-2013, 09:13 AM   #16
Registered User
 
BYprodriver's Avatar
 
Join Date: Oct 2008
Location: O.C. CA
Posts: 3,709
Garage
Quote:
Originally Posted by thomasotten View Post
Well, I guess there is one in every forum. If you must know, I spent the last few hours searching and reading about the procedure but I did not see a time estimate. Sorry that I ventured to ask a simple question without first using the search function. Thanks to everyone else for the heartfelt welcome.
Yeah there is but usually they are trainable. So now I'm even more confused.
BYprodriver is offline   Reply With Quote
Old 02-12-2013, 04:25 PM   #17
Registered User
 
Join Date: Feb 2013
Location: San Antonio, Texas
Posts: 24
B

Quote:
Originally Posted by Perfectlap View Post
Welcome.

My only experience with 914's was seeing them at nearly every PCA autocross. Unfortunately not in a good way. I'd say it was 50/50 odds that one would break down during a session, causing a long delay, pile up of cars queing up, and probably spilling some slippery juice on the course. Left me with the impression that Porsche's evolved because owners needed durability.
Sounds like a real clunker! :-)

It's OK, the 914 suffered from poor ownership and a thin margin of profitability from the Porsche/VW venture. But... they are actually a pretty reliable car for the era. Compared to the Boxster, they do have more interior space. And, oddly enough, the 914 gets more attention than most modern Porsches. You just don't see them everyday. Mine is in very good condition, and people really like it at car shows, gas stations, etc.
thomasotten is offline   Reply With Quote
Old 02-18-2013, 05:56 PM   #18
Registered User
 
Join Date: Feb 2013
Location: San Antonio, Texas
Posts: 24
Clean

Some Fotos of the car. I started cleaning it up with a clay bar all around.


thomasotten is offline   Reply With Quote
Old 02-18-2013, 06:04 PM   #19
Registered User
 
Join Date: Jan 2013
Location: Houston
Posts: 370
Quote:
And, oddly enough, the 914 gets more attention than most modern Porsches. You just don't see them everyday.
I rarely get any comments on mine. And I've never seen another 914 on the road in Houston in my life aside from mine. I know of a couple that exist - but never seen them or others out.

Quote:
Mine is in very good condition, and people really like it at car shows, gas stations, etc.
It would be hilarous if yours looked like mine for that car too. http://i.imgur.com/aCkmb.jpg

Last edited by patssle; 02-18-2013 at 06:30 PM.
patssle is offline   Reply With Quote
Old 02-18-2013, 06:23 PM   #20
Registered User
 
Join Date: Feb 2013
Location: San Antonio, Texas
Posts: 24
Here's mine




thomasotten is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 08:56 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page