986 Forum - The Community for Porsche Boxster & Cayman Owners
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

986 Forum - The Community for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Boxster General Discussions (http://986forum.com/forums/boxster-general-discussions/)
-   -   repair quote (http://986forum.com/forums/boxster-general-discussions/42828-repair-quote.html)

Jager 01-19-2013 09:51 AM
Quote:
Originally Posted by oc-boxster (Post 324224)
Should I replace that RMS anyway? It's apart and the seal is cheap enough
I second the "Replace It" it's easy to do and good preventative maintenance.

oc-boxster 01-19-2013 10:15 AM
Thanks guys! Feeling good about the decision I made not to wait any longer for some reason I was thinking my ims would be fine, I thought wrong-way wrong!

SF-Rockster 01-19-2013 12:57 PM
Good catch! Hate to see it go bad.

Meir 01-19-2013 01:47 PM
Quote:
Originally Posted by AndyA6 (Post 324273)
Give the mechanics a break! They need to make a buck or two same as we all have to.

If you were self employed you would try to make as much as you can, right? Same for "stealerships", they have a so much high overhead and our German friends tell them in detail what they can do and what not, including to invest a lot of money into building upgrades etc.

Having said that above quote is fair. Live and let live.
+1 on that. Didn't have any intention disrespecting the mechanics among us.
Just like most of the guys here, I think oc was fairly Quoted.
Was under the impression Thom is buying the parts himself.

oc-boxster 01-22-2013 05:49 PM
http://986forum.com/forums/uploads01...1358905686.jpg
[

img]http://986forum.com/forums/uploads01/image1358905732.jpg[/img
shiny new parts

oc-boxster 01-22-2013 06:02 PM
http://986forum.com/forums/uploads01...1358906535.jpg
http://986forum.com/forums/uploads01...1358906563.jpg

Meir 01-22-2013 06:42 PM
nice.
i always like to see new parts :D
you gonna love your car even more with the new clutch on.
i almost made a hole in the floor, when i pressed the clutch pedal for the first time.

shadrach74 01-22-2013 07:00 PM
Quote:
Originally Posted by oc-boxster (Post 324284)
Thanks guys! Feeling good about the decision I made not to wait any longer for some reason I was thinking my ims would be fine, I thought wrong-way wrong!
Do let us know the condition of the old bearing. I see that the IMS cover is leaking, as much as others suggest that it's a definite IMS failure, the only thing that's definite from your photos is IMS cover failure...keep us posted!

Thanks!

oc-boxster 01-22-2013 07:07 PM
Will do, picking it up tomorrow morning I'm interested in the condition of the bearing too

oc-boxster 01-22-2013 07:46 PM
http://986forum.com/forums/uploads01...1358912672.jpg
http://986forum.com/forums/uploads01...1358912691.jpg
http://986forum.com/forums/uploads01...1358912708.jpg
My mechanic just sent me these photos-without speaking to him I'm assuming the first two are of the original bearing and the third is of the new one installed.

Meir 01-22-2013 08:55 PM
Well, the bearing looks intact.
Once you have it in your hand, you will be able to check for play.

oc-boxster 01-23-2013 10:55 AM
http://986forum.com/forums/uploads01...1358967283.jpg
One last picture as it goes back together

oc-boxster 01-23-2013 03:42 PM
Got my car and old parts back. I can't even describe the difference it's like a brand new car to me-I haven't broken the old bearing open but there is a lot of play in the center shaft and it sounds like a bag of marbles if I shake it

san rensho 01-23-2013 03:52 PM
Looks like you dodged a bullet on the IMSB. How many miles on it?

oc-boxster 01-23-2013 03:55 PM
88,000 I bought it a year ago with 82,000 miles-

Meir 01-23-2013 04:39 PM
Quote:
Originally Posted by oc-boxster (Post 324879)
88,000 I bought it a year ago with 82,000 miles-
There goes the theory of "high miles, the Bering is fine".
Happy for you that you cought it on time.
A question that I always wanted to ask.
Did you hear any nois coming from the engine, that now is gone?
And did you get a chance to read the cam deviation values before the retrofit?

oc-boxster 01-23-2013 04:53 PM
Did not get any cam deviation info, but a big difference I have noticed-before when I would turn the car off I would get a definite shake down chain sounding rattle, that sound is completely gone now..like others that I have read about I had no start up rattle at all just when I shut it
Off


All times are GMT -8. The time now is 04:35 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website