dead battery...Procedure to replace battery
have a dead battery on my '01.current voltage of battery is 5V and low oil & low battery volt warning lights are on.Car has remote key lock
Does 12v need to maintained when swapping for new battery.I am not worried about it messing up radio settings but does removing battery affect any critical function or car alarm. |
No, 12v does not need to be maintained unless you want to keep your settings. Removing the battery powers off everything electrical, so the alarm would not work, until you put a new battery in.
|
After you replace the battery you will need to:
Enter your radio code Roll your windows the whole way up, then release the buttons and push again for a second or so. Reset your egas. Without touching gas pedal, turn key on for a minute or so, then turn off for more than 10 seconds. Wal Mart has the correct battery. |
I picked up an Energizer bunny battery from Sams.
Don't forget to leave your frunk open! I place a piece of styrofoam OVER the front latch so it cannot shut. Also, that reminds me to re-connect the battery. Don't be afraid to disconnect it/replace it. Just do it right! I have disconnected my battery at least 30 times doing "upgrades". @Paul - Didn't know about the eGas thing….does it reset itself by itself? Because I have not been performing that particular step. Any downside or does egas system re-adjust? Learn something new everyday!:D |
Quote:
I did a write-up on the battery that should be used in our cars. Best one out there is the EverStart® Battery MAXX-94R which is carried at Wal-Mart. http://986forum.com/forums/performance-technical-chat/36071-986-battery-group.html |
All times are GMT -8. The time now is 12:59 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website