What did you do with/to your Boxster today?

[oc-boxster]

adjusted the front hood height, no more whistle! and got my tires balanced. smooth and quiet on the highway again

[Pdwight]

I didn't know the hood height was adjustable

[oc-boxster]

There are two black rubber bushings in the corners of the front edge that are adjustable mine needed to be turned up to lower below the bumper slightly.

[Pdwight]

Thanks, this is why I love this forum

[911monty]

You can also remove the trim around the latch and the hood latch is also adjustable up and down and left to right.

[amagalla]

Put on a third coat of wax. Man, it looks nice.

Sent from my SAMSUNG-SM-G920A using Tapatalk

[alm001]

Polished it then sealed, but the polish I got wasn't aggressive enough. I will have to try again in a couple weeks. There is a lot of etching from birds in the hood, but right now it looks good from my desk.

[EJ-Fresno]

I just got to finish installing the Sirius radio in my car.
Woody sent me all the parts and cables so everything looks stock and genuine
Now I don't have to change channels during commercials !
Thanks again Woody.

[alm001]

I drove on a cobblestone road. Not recommended.

[paulofto]

I spent Saturday painting my rear bumperettes Arctic Silver to match the body. Lot's of prep and sanding but the final look was worth it.

After cleaning with acetone they got a 2 coats of plastic prep spray


Then 3 coats of primer, sanding with 600 and 1000 wet sandpaper between coats.


Then 4 coats of arctic silver base coat sanding with 1500 grit between coats leaving the final coat un-sanded.


And finally 4 coats of clear coat, sanding between coats 2 and 3 with 1500 grit


All the material was purchased from Automotive Touchup and matched perfectly.

[paulofto]

Here they are reinstalled on the car.

Originally Posted by paulofto

I spent Saturday painting my rear bumperettes Arctic Silver to match the body. Lot's of prep and sanding but the final look was worth it.

After cleaning with acetone they got a 2 coats of plastic prep spray


Then 3 coats of primer, sanding with 600 and 1000 wet sandpaper between coats.


Then 4 coats of arctic silver base coat sanding with 1500 grit between coats leaving the final coat un-sanded.


And finally 4 coats of clear coat, sanding between coats 2 and 3 with 1500 grit


All the material was purchased from Automotive Touchup and matched perfectly.

[amagalla]

It has to bee done at the dealer or through an indy, and the key fob has to have programming tag.

Sent from my SAMSUNG-SM-G920A using Tapatalk

[GTA_G20]

Ya no programming tag here. Just the keyfob and its never worked since ive had the car lol

[fridsten]

Not today, but two days ago I cleaned the interior, put the hardtop on and washed it.


I think it looks good this way too.

[fins]

Converted the S into my DD this week while truck in body shop. Backed into a pole!!

[dghii]

Got it back from my 22 year old, who was using it while his car was in the shop...Whew!

[alm001]

Tossed the hardtop on for a rainy weekend. It's MUCH quieter on the highway.

[alm001]

[samandrewsone]

I had seated in there and put a little damage in the bonnet. I had a guy come out to sort the damage out and you could never tell it was ever there.

baltimore car service | baltimore limo | baltimore limousines
For any assistance please call (443) 636 – 7437 Email at bmorelimo@gmail.com

[jpc763]

Upgraded my headlights to Nine8Six's HID lights!

Before


After