![]() |
Window/top issue
I posted this on Pelican bit got responses so I thought i try a cross post... I have a new issue... when I unlatch the top, the windows no longer drop however if I manually lower them, they go up when I re-latch the top. Here is what I have done so far:
2001 Boxster S with 15,000 miles Disconnected the battery, waited 10-15 min and reconnected it. No changed. Bought (from Pelican) a new micro switch that goes between the sun visors. After replacing the micro switch I get the same result. Windows don't drop when unlatched however they do go up when latched. If I depress the window switches, the windows will go full up or full down properly. I am open to suggestions or ideas. Vince |
Make sure that the mechanical part of the top latch switch is connecting to the top microswitch that you replaced - its like a spring loaded plunger in the hole where the top latch goes.
|
can you lower the top?
|
Quote:
Vince |
Quote:
Any chance the big convertible top relay in the foot well controls the windows as well? I'll look at the manual tonight to see if there are any specific fuses to the top/window interplay. Vince |
All times are GMT -8. The time now is 12:57 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website