mirror replacement question
Hi Guys,
I've searched and couldn't find an answer to this. I thought I'd asked the folks here before I dive into this project. My driver side mirror suffered a stress crack, as as result I purchased an whole new (used) mirror and am ready to install it. My question is, do I need to remove the door card or can I just pop out the mirror control piece, and remove the 3 bolts, and reinstall the new mirror? I've replaced mirrors on different cars before and some do require removal of the door cards. Any help is greatly appreciative! Regards, Dan:cheers: |
no need to remove the door panel. be carefull w/ the 3 screws, though. it's easy to drop them down inside the door. :rolleyes:
Quote:
|
Great, thanks!:cheers:
|
Okay, I ran into another snag. I removed the mirror switch and plastic triangle cover. My issue now is, I only see 2 torx screws and one is behind a very hard to reach spot.
What tool is needed to remove that third torx screw? Thanks! |
yeah, I have the same problem, what tool do you use to get in there?
|
omg, you can just go right to it... there is a aluminum colored sticker over the hole....
I am so dumb... |
All times are GMT -8. The time now is 11:50 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website