Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 09-14-2011, 06:41 PM   #1
Registered User
 
Join Date: Oct 2009
Location: atlanta
Posts: 100
Slow Top

My top started closing and opening slowly, all of a sudden. Never had a problem before. It's not making and binding noises, or struggling at all. Is this just the motor running down, or is there some kind of maintenace i should do?

keithl is offline   Reply With Quote
Old 09-15-2011, 07:33 AM   #2
kpm
Registered User
 
Join Date: Apr 2010
Location: Bowie Md.
Posts: 117
Put the stopwatch on it. Should be 12 seconds.
kpm is offline   Reply With Quote
Old 09-15-2011, 08:18 AM   #3
Registered User
 
Join Date: Oct 2009
Location: atlanta
Posts: 100
Quote:
Originally Posted by kpm
Put the stopwatch on it. Should be 12 seconds.
I will when I get a chance, but it is definitely slower all of a sudden. Thanks.
keithl is offline   Reply With Quote
Old 09-16-2011, 05:49 PM   #4
Registered User
 
Steve Tinker's Avatar
 
Join Date: Dec 2008
Location: Queensland, Australia
Posts: 1,522
A slow top can mean a voltage reduction @ the motor (low battery voltage or high resistance switch contact), a dying motor or a transmission fault.
If its a transmission going west, its big dollars.....
__________________
2001 Boxster S (triple black). Sleeping easier with LN Engineering/Flat 6 IMS upgrade, low temp thermostat & underspeed pulley.
2001 MV Agusta F4.
Steve Tinker is offline   Reply With Quote
Old 09-19-2011, 05:03 AM   #5
Registered User
 
Join Date: Oct 2009
Location: atlanta
Posts: 100
Quote:
Originally Posted by Steve Tinker
A slow top can mean a voltage reduction @ the motor (low battery voltage or high resistance switch contact), a dying motor or a transmission fault.
If its a transmission going west, its big dollars.....

Transmission?
keithl is offline   Reply With Quote
Old 09-19-2011, 10:04 AM   #6
Registered User
 
tonycarreon's Avatar
 
Join Date: May 2009
Location: Frederick, MD
Posts: 1,396
the top has 2 transmissions - one on each side. parts are around $600/ea.

http://www.pelicanparts.com/catalog/shopcart/986M/POR_986M_BDYcon_pg1.htm
__________________
"Speed has never killed anyone, suddenly becoming stationary... that's what gets you."
tonycarreon is offline   Reply With Quote
Old 09-19-2011, 11:42 AM   #7
Registered User
 
Join Date: Oct 2009
Location: atlanta
Posts: 100
Quote:
Originally Posted by tonycarreon
the top has 2 transmissions - one on each side. parts are around $600/ea.

http://www.pelicanparts.com/catalog/shopcart/986M/POR_986M_BDYcon_pg1.htm

oh ok, thanks for the clarification.
keithl is offline   Reply With Quote
Old 09-19-2011, 03:40 PM   #8
Registered User
 
Join Date: Oct 2009
Location: atlanta
Posts: 100
Well now the top doesnt open at all. The passenger side of the rear clamshell doesn't rise at all. The driver side goes up normally, but the otherside stays down.

Last edited by keithl; 09-21-2011 at 04:29 PM.
keithl is offline   Reply With Quote
Old 09-19-2011, 06:31 PM   #9
Registered User
 
Join Date: Sep 2008
Location: Florida
Posts: 2,492
don't mess with it!

You have a broken cable on the side that isn't moving.

You need to get your convertible top and clam shell disconnected from the top mechanism and then replace the cable. Each cable is about $30 and not that difficult to replace.

There are lots of threads with instructions for fixing top mechanisms.

What year is your car?

Is the top currently up or down? It is much easier to disconnect if it is down.

You can use your top manually while you assess your repair.
dghii is offline   Reply With Quote
Old 09-20-2011, 05:44 AM   #10
Registered User
 
Join Date: Oct 2009
Location: atlanta
Posts: 100
Quote:
Originally Posted by dghii
You have a broken cable on the side that isn't moving.

You need to get your convertible top and clam shell disconnected from the top mechanism and then replace the cable. Each cable is about $30 and not that difficult to replace.

There are lots of threads with instructions for fixing top mechanisms.

What year is your car?

Is the top currently up or down? It is much easier to disconnect if it is down.

You can use your top manually while you assess your repair.
1999 and the top is up. It seems hard to get to anything with the top up. Thanks.
keithl is offline   Reply With Quote
Old 09-20-2011, 09:18 AM   #11
Registered User
 
Join Date: May 2011
Location: Essex, CT United States
Posts: 301
Whatever you do, DON'T TRY TO POWER THE TOP DOWN. You will damage the linkages and possibly bend the tracks.

You need to disconnect the transmission links. First you need to be able to get at them. If you look between the outboard side of the seats and the body, you will see either red (original) or white (newer) ball sockets. You can pop these off with a screw driver. Next, you need to reach in by the fabric and find the plastic coated wire cables (one on each side) that hold the bottom edge of the convertible top in place. Follow them down and you will come to another small ball socket which you can pop off by hand. Now you should be able to move the top out of the way and get to the transmission links that hold the clamshell.

Whatever you do, DO NOT remove the screw that holds the metal link together on the slotted hole. This length is set at the factory and is a PITA to adjust correctly. Just remove it at the ends where it attaches to the transmission.

Once you've done this you should be able to raise the clamshell by hand and gain access to the motor.

I've read DIYs where you can fix the cable without replacing if it has broken at the motor end. It involves cutting the sheath shorter and exposing the un-unraveled end of the wire cable ( you will know what I mean when you see it ).
__________________
2002 Boxster S, Arctic Silver, 18" Turbo Wheels, 6-speed
peterbrown77 is offline   Reply With Quote
Old 09-20-2011, 10:25 AM   #12
Registered User
 
Join Date: Oct 2009
Location: atlanta
Posts: 100
Quote:
Originally Posted by peterbrown77
Whatever you do, DON'T TRY TO POWER THE TOP DOWN. You will damage the linkages and possibly bend the tracks.

You need to disconnect the transmission links. First you need to be able to get at them. If you look between the outboard side of the seats and the body, you will see either red (original) or white (newer) ball sockets. You can pop these off with a screw driver. Next, you need to reach in by the fabric and find the plastic coated wire cables (one on each side) that hold the bottom edge of the convertible top in place. Follow them down and you will come to another small ball socket which you can pop off by hand. Now you should be able to move the top out of the way and get to the transmission links that hold the clamshell.

Whatever you do, DO NOT remove the screw that holds the metal link together on the slotted hole. This length is set at the factory and is a PITA to adjust correctly. Just remove it at the ends where it attaches to the transmission.

Once you've done this you should be able to raise the clamshell by hand and gain access to the motor.

I've read DIYs where you can fix the cable without replacing if it has broken at the motor end. It involves cutting the sheath shorter and exposing the un-unraveled end of the wire cable ( you will know what I mean when you see it ).

Thanks, I really appreciate the help. I got the small ball socket disconnected, however I don't see any red or white larger ball socket. I see a black one connected
to something on a wheel. It is the only other socket I see, is this the one to disconnect? It is very hard to see anything in there? thanks.
keithl is offline   Reply With Quote
Old 09-20-2011, 12:03 PM   #13
Registered User
 
Join Date: Oct 2009
Location: atlanta
Posts: 100
Quote:
Originally Posted by peterbrown77
Whatever you do, DON'T TRY TO POWER THE TOP DOWN. You will damage the linkages and possibly bend the tracks.

You need to disconnect the transmission links. First you need to be able to get at them. If you look between the outboard side of the seats and the body, you will see either red (original) or white (newer) ball sockets. You can pop these off with a screw driver. Next, you need to reach in by the fabric and find the plastic coated wire cables (one on each side) that hold the bottom edge of the convertible top in place. Follow them down and you will come to another small ball socket which you can pop off by hand. Now you should be able to move the top out of the way and get to the transmission links that hold the clamshell.

Whatever you do, DO NOT remove the screw that holds the metal link together on the slotted hole. This length is set at the factory and is a PITA to adjust correctly. Just remove it at the ends where it attaches to the transmission.

Once you've done this you should be able to raise the clamshell by hand and gain access to the motor.

I've read DIYs where you can fix the cable without replacing if it has broken at the motor end. It involves cutting the sheath shorter and exposing the un-unraveled end of the wire cable ( you will know what I mean when you see it ).
Top is up and clamshell is stuck down, so the red/white ball socket is not accessible. Don't see how I could get to it. I will try the other push rod.

The large black ball joint won't come loose with the Porsche tool. I'll have to try a crowbar if I can get it in there. They don't make it easy do they?


Last edited by keithl; 09-20-2011 at 12:53 PM.
keithl is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 08:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page