01-06-2012, 04:02 PM
|
#1
|
Registered User
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
|
Quote:
Originally Posted by milliemax
Yesterday I talked to my INDY in his private office. He as been building,racing repairing , instructing for Porsche Club of America for 35 + years. He told me his business has been servicing many "Boxters" for years and has NEVER experienced an IMS failure. He told me that every engine made has "a little trouble engineered into them" meaning,Chevy,Ford,Audi, etc. And this did not mean that I would not be the 1st to have a problem. As for "cold start rattle" ? He told me that it's a Porsche and to be concerned with only the "strange rattle" that you may hear ! Then attack it ASAP. We also discussed the "World wide marketing" of Boxter after market parts, big bucks !!! I change my oil and love my first Porsche !!!. Hope you all feel the same. PS, IMS I love you too !!! Hope you love me !!! How bout it Danger? Tell us about your IMS.
|
First you"ve got to talk nicely to the bearing nicely ( i.e. A positive inducement) .If that doesn't work, then you have to eliminate the problem ( i.e . A negative inducement) .
__________________
Don't worry … I've got the microfilm.
|
|
|
01-06-2012, 05:03 PM
|
#2
|
Registered User
Join Date: Sep 2011
Location: eastern NC Crystal Coast
Posts: 413
|
Thanks Danger ! AND what has happened to John99 ? Have not heard from him since you two took off to that "after party" last Sat night ? Hope his IMS is "OK" and he is not parting it out !!!
|
|
|
01-06-2012, 05:11 PM
|
#3
|
Registered User
Join Date: Jun 2004
Location: Des Moines, IA
Posts: 8,083
|
Then there is the experience of my neighbor and good friend who bought a new Box in 2004. 7500 miles on the clock, sitting at a red light.
Bang. IMS, engine gone.
The same local dealer that I spoke of above had a new engine in the car in 7 days. His comment was "the region has a ton of these in stock!"
I wonder why?
__________________
Rich Belloff
|
|
|
01-06-2012, 05:25 PM
|
#4
|
Registered User
Join Date: Sep 2011
Location: eastern NC Crystal Coast
Posts: 413
|
Rich , I wonder also, but it's not like I am stuck on the moon with an IMS failure and can"t get home. AAA tow truck ! (keep your membership ! ) "Major Tom" (He's Danger's cousin)
|
|
|
01-07-2012, 04:22 AM
|
#5
|
Registered User
Join Date: Dec 2011
Location: Long Island, NY
Posts: 518
|
Well with all this fear mongering I guess I don't want to feel left out. Misery loves company. Thinking of installing the guardian. During the last and the very first oil that "I" did i filtered the entire 8 qt of oil thru a fine filter - didn't have the magnetic plug. I found some very fine metal particles. could hardly see them but when touching the, you could feel them. I would guess about 20-30 of them at the most. Looked nothing like the oicture on the LN website. Ran the camchaft deviation on Durametric and it is steady and not wavering. Not at 0 but remember around -3 or -4 something for 1 and 2.
My questions to you wise men are is the above any indication of impending doomsday (or kaboom day) or an indication of all is well now but keep monitoring. Other question is with the Ims guardian installed, is the Ims bearing the only part that will throw out bits and pieces of metal? Would anything else possibly cause metal pieces to float around and trigger an alert?
__________________
*********************************
2012 Panamera 4
2010 Boxster
2000 Boxster S 3.2L
1990 Land Rover Defender 6x6
|
|
|
01-07-2012, 06:10 AM
|
#6
|
Registered User
Join Date: Jul 2011
Location: Denver/Winter Park, CO USA
Posts: 600
|
No fear. No mongering. I, for one, always like a service contract on any used vehicle I have. If you keep your cars in stock, mint condition (and little things cost 600-1,000 to repair) it's worth it. There's a higher probability that the mechanisms in your windows and top will go out than any IMS. My warranty covers all of them.
__________________
Denver Steve
Carrera, Cabriolet, 6-Speed, Black/Tan
Last edited by DenverSteve; 01-07-2012 at 12:36 PM.
|
|
|
01-07-2012, 09:36 AM
|
#7
|
07 Carrera S Cab
Join Date: Nov 2005
Location: New Jersey
Posts: 2,273
|
I've got 67k miles on my 01. Only change the oil at 12-15k mile intervals or every 2 yrs. The car's engine hasn't failed me yet, but if it does, that's ok. I'll sell it as a roller cause it's so old already. I'm not gonna fix what ain't broke. YMMV.
__________________
Current: 07 Carrera S Cab in Midnight Blue
Previous: 01 Boxster in Arctic Silver, 86 944 in Guards Red
|
|
|
01-08-2012, 04:32 PM
|
#8
|
Registered User
Join Date: Sep 2011
Location: eastern NC Crystal Coast
Posts: 413
|
Johnny Danger , Where are you on this ??? Max
|
|
|
01-08-2012, 05:49 PM
|
#9
|
Registered User
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
|
It's just like playing baccarat. In the end, it's either you or the bearing who wins .
__________________
Don't worry … I've got the microfilm.
Last edited by Johnny Danger; 01-08-2012 at 05:59 PM.
|
|
|
01-09-2012, 01:29 PM
|
#10
|
Matt
Join Date: Nov 2011
Location: Colorado
Posts: 284
|
I'm not worried about the IMS (I'll say up front), but after looking into ALL the potential issues with any car as it ages, I decided to call DenverSteve's agent and picked up an extended service warranty. Easy, quick, great coverage, cheaper than 2-3 repairs that many of these could need (top mechanism, window regulators, dripping rear main seal, bearings of course, and all the other non "wear and tear" items). A simple IMS retrofit would cost about the same as this entire policy did, and this covers that and so much more.
The price (for me) is great for peace-of-mind so I (like Tim Tebow  ) pulled the trigger. I mentioned Steve Crain's name and he extended the holiday discount, but he wasn't sure how long he could do this. Now, let the revving begin.... or continue.
|
|
|
01-28-2012, 05:26 PM
|
#11
|
Registered User
Join Date: Jan 2012
Location: SoCal
Posts: 2
|
Intriguing. I started looking at older Boxsters and found one that I thought was worth taking to a mechanic for an inspection. I looked up the local Porsche mechanic and stopped by one afternoon to arrange the inspection.
The gentleman who owned the shop was shall we say a grizzled veteran of repairing Porsches. When I asked if it was possible to make an appointment to inspect a Boxster he flat refused to do it.
He said, "I'll save you the money, don't buy a used Boxster. Their engines are crap. Look out there, I'm fixing two of them now with engines that are bad. The white one is the second time I've replaced the engine. Do you have that kind of money to lose? If you want to buy a Porsche get a 911 with an air cooled engine, those are worth fixing up. That or get a new one with a warranty."
Needless to say I was shocked, I appreciated his candor but what a major buzz kill. I even tried a second time during our conversation to get him to look at the car and he flat out refused.
After reading all the point / counterpoints here I think I have an idea of what he's up against as a used Porsche mechanic.
Truly one of the strangest experiences I've had at a mechanic and I've had several over the years. My plan now is to wait for the new Boxster to come out this summer.
|
|
|
01-28-2012, 06:36 PM
|
#12
|
Registered User
Join Date: Oct 2011
Location: Olympia, Wa
Posts: 370
|
sounds like that mechanic just hates the water-pumpers, he probably would refuse to look at a 944/968/928 too
|
|
|
01-28-2012, 09:27 PM
|
#13
|
Registered User
Join Date: Feb 2011
Location: Algonquin, Misarikwack
Posts: 710
|
My IMS' early warning are my eyes. I turn on the micro-eagle-vision ON when I change the oil at every 2,500km on my 97 with 115,000km on the clock (cheap job, and it can't hurt). A good inspection of the oil filter is required at that point and if any failure, it will first reveal plastics/rubber debris. At that stage (normally) the balls have started to change shape however they will start to disintegrate a "few thousand" km after the bearing plastic goes so there is plenty of time to catch it before it completely blows up.
That's what a 22+ experienced Porsche engineer (based in Leipzig) told me to do when I childishly visit the factory a few months ago while on business trip in Germany. He also added that if you use Porsche approved oils & viscosity and change at recommended intervals the chances that you have a failure is 0.01%. Sounded very simple to him
If I understood... the IMS bearing failures are related to poor maintenance and careless owners. Sure many owners high-rev their porsche with cheap oil that has 5000k more (cokacola!) and then wonders.... why are my bearings failing %*&^^%$$
|
|
|
01-29-2012, 06:39 AM
|
#14
|
Registered User
Join Date: Oct 2008
Location: Colorado
Posts: 317
|
Quote:
Originally Posted by madmods
My IMS' early warning are my eyes. I turn on the micro-eagle-vision ON when I change the oil at every 2,500km on my 97 with 115,000km on the clock (cheap job, and it can't hurt). A good inspection of the oil filter is required at that point and if any failure, it will first reveal plastics/rubber debris. At that stage (normally) the balls have started to change shape however they will start to disintegrate a "few thousand" km after the bearing plastic goes so there is plenty of time to catch it before it completely blows up.
That's what a 22+ experienced Porsche engineer (based in Leipzig) told me to do when I childishly visit the factory a few months ago while on business trip in Germany. He also added that if you use Porsche approved oils & viscosity and change at recommended intervals the chances that you have a failure is 0.01%. Sounded very simple to him
If I understood... the IMS bearing failures are related to poor maintenance and careless owners. Sure many owners high-rev their porsche with cheap oil that has 5000k more (cokacola!) and then wonders.... why are my bearings failing %*&^^%$$
|
From everything I've read on this forum, I understand the IMS bearing is not lubricated by the engine oil. It is a sealed bearing. I don't understand how changing your oil more frequently or using a different grade of engine oil, or even inspecting the oil while you are draining it would show you any signs of impending failure. Is there something I don't understand here?
__________________
Dave S.
2003 Boxster S
|
|
|
01-28-2012, 11:08 PM
|
#15
|
Registered User
Join Date: May 2009
Location: Seattle - It's not Hell, but you can see it from here!
Posts: 236
|
my car just got back from having the bearing replaced.
while i don't think it adds any value to the car, i see it as insurance against a larger failure.
just like your real insurance, you pay and pay and pay and if you never have an at-fault accident or file a claim it seems like that money was just thrown away. but if you ever did...
my old bearing came out perfect. it may have never failed. but if it ever did...
__________________
dave
2001 Porsche Boxster S
1988 Porsche 928 S4
|
|
|
01-29-2012, 12:15 AM
|
#16
|
Ex Esso kid
Join Date: Dec 2005
Location: NY
Posts: 1,605
|
While its certainly true every car has its weaknesses, most Porsche vehicles are coddled. Extra fluid changes, no rough weather. I have owned two Ford trucks. If we were in Vegas and the bet was Ford 150 against the newest Porsche for which one will crack 100K without fuss, I'm going with the truck.
On a side note, when you tell a Ford dealer that you are arranging finance for Monday and he tells you they have accepted the parameters of the deal. You typically don't get an email that afternoon telling you they have a pending deal with someone else. Buying a P car on the net is horrible, not only can they eff you with hidden damage, they treat you even worse. I've been pissed about it all night. I emailed the dealer and congratulated the sales rep. I hope that sale is as solid as you say because if he backs out I'm not buying it or anything else you have. It's beginning to look a lot like no more sports car at all. Porsche we pray there is no substitute because if someone comes up with one we will become a German Eastman Kodak.
Last edited by Ghostrider 310; 01-29-2012 at 12:44 AM.
|
|
|
01-29-2012, 02:07 AM
|
#17
|
Ex Esso kid
Join Date: Dec 2005
Location: NY
Posts: 1,605
|
My last words, the problem with car sales is it is not a repeat business especially over the net. That gives the seller huge leverage. I sold to hospitals, if you screwed someone it could impact business for years sometimes decades, not so in car sales. Screw em, take their money and move is the battlefield. If I do buy one of these cars which feels wrong this morning it will be no more Mr. courtesy, they want my money they are going to Smith Barney earn it or they get none. These salesman, its really nice to be financially dehumanized by people who likely have half your net worth, I love the cars but the acquisition process is god awful.
Last edited by Ghostrider 310; 01-29-2012 at 02:10 AM.
|
|
|
01-29-2012, 06:13 AM
|
#18
|
Registered User
Join Date: Jan 2012
Location: Austin, TX
Posts: 9
|
I've been lucky to have mainly good experiences with car dealers from Mazda, Honda, Chevy, and Fiat where I recently bought my used Boxster which I found on ebay. One must remember that the seller and product are two different issues. If I didn't like a dealer I walked and I suggest you do the same. No one enjoys dropping a large sum of money and receiving piss poor service in return. Good luck
|
|
|
01-29-2012, 08:05 AM
|
#19
|
Registered User
Join Date: Jun 2004
Location: Des Moines, IA
Posts: 8,083
|
This is bunk. How can this be so when my friend's new Box (back in 05) had 11K miles on it and failed sitting at a stop light.
Self serving cover up for a bad design.
__________________
Rich Belloff
|
|
|
01-29-2012, 08:07 AM
|
#20
|
Registered User
Join Date: Jun 2004
Location: Des Moines, IA
Posts: 8,083
|
BTW- I used to sell Porsche's and consider myself quite ethical. I cannot speak for others.
__________________
Rich Belloff
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 11:09 PM.
| |