Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 05-04-2005, 04:57 AM   #1
Registered User
 
Join Date: Apr 2005
Location: South Carolina
Posts: 435
dumb "wheels & tires 101" question

I'm presently on 17" Porsche wheels with the standard size tires (205/50 and 255/40) - what size wheels and tires can you go to in a bolt-on mode, i.e. no changes, no fender scrub, no problems. Doubt I would go beyond 18" rims, but what about width? I see some interesting wheel/tire packages out there, but not sure what would fit and what wouldn't.
When do the spacers come into play? thanks for the patience -

limoncello is offline   Reply With Quote
Old 05-04-2005, 06:28 AM   #2
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
Well personally I would avoid spacers, but that's ony because I intend to track the car and attend some driving schools. Porsche naturally doesn't sign off on it.
But Spacers would be needed if you trying to retrofit a 911 rear wheel to the Boxster. That's a 10" wheel.
Better to stick to the Boxster widths. Check out Wheelenhacement.com they have a very good menu of wheels that will fit and they will answer any questions via email regarding spacers and lugs.
Just a quick note, if going bigger (18") try to get a light weight wheel. You'll get the looks without any big change in ride quality.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW
Perfectlap is offline   Reply With Quote
Old 05-04-2005, 06:37 AM   #3
Registered User
 
Join Date: Jan 2005
Posts: 335
While we're on this topic, do the 18s that come on the 987 fit the 986?
BuffaloBoxster is offline   Reply With Quote
Old 05-04-2005, 07:20 AM   #4
Registered User
 
Ronzi's Avatar
 
Join Date: May 2004
Location: Denver CO
Posts: 748
I have a set of 18" wheels, 8.5" in front and 10.5" in the back, presumably with standard Boxster offset, although I've not measured them.
The additional width is mostly because of a "lip" to the outside of the wheel. You can see it, particularly on the rear wheels, in the picture, above. No problems with rubbing, etc.
I'd tell you what brand they are, but I have never been able to find any identifying mark(s), so I don't know. They are a single-piece alloy wheel, Sport Design style, but not factory wheels.
Ronzi is offline   Reply With Quote
Old 05-04-2005, 08:48 AM   #5
Registered User
 
Thumper's Avatar
 
Join Date: Dec 2004
Location: McKinney, TX
Posts: 473
I also have a set of 18" rims, 8.5" wide in front, and 10" wide in back. No spacers. Mine are Gemballa Competition rims made by Speedline. I have no problems with rubbing and they fill out the wheelwells nicely. Your higher end wheel houses can give you the proper offset measurements so that you don't need spacers.
Thumper is offline   Reply With Quote
Old 05-04-2005, 09:05 AM   #6
Registered User
 
Join Date: Apr 2005
Location: South Carolina
Posts: 435
Thumper & Ronzi - thanks. What size tires did you go to?
Perfectlap - checked out Wheelenhancement - good site, lots of choices.
limoncello is offline   Reply With Quote
Old 05-04-2005, 09:36 AM   #7
Registered User
 
Thumper's Avatar
 
Join Date: Dec 2004
Location: McKinney, TX
Posts: 473
I just went with the Porsche factory recommendation for 18" wheels.

225/40/18 front

265/35/18 rear
Thumper is offline   Reply With Quote
Old 05-04-2005, 10:15 AM   #8
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
I went with 245's in the rear on my 18x9 Carrera 5 spokes. (225 up front).

The tech over at Frisby Race Tire felt the 265 would have been too much for track and Autocross. Being that they sell allot of race tires like Hoosiers and Kuhmo Victoracers I went along with his recommendation.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW
Perfectlap is offline   Reply With Quote
Old 05-04-2005, 11:00 AM   #9
Registered User
 
Ronzi's Avatar
 
Join Date: May 2004
Location: Denver CO
Posts: 748
Ditto to the sizes Thumper mentioned.
Not an autocrosser, so overtire-ing the car is not a issue with me.
From the back, it looks like the car is mostly tires and exhaust pipe.
Ronzi is offline   Reply With Quote
Old 05-04-2005, 01:18 PM   #10
Crazed P-Car enthusiast
 
Join Date: Sep 2004
Location: Toronto, Canada
Posts: 150
What year is your Box'? Apparently, '97s don't take well to 18" rims. Search the board, but I remember a recent thread in this forum detailing the problem. If your car is not a '97, fogetaboutit, it doesn't apply to you.
__________________
What's behind me does not matter.
IceBox is offline   Reply With Quote
Old 05-04-2005, 06:40 PM   #11
Lux
Registered User
 
Join Date: Aug 2004
Location: Bay Area, CA
Posts: 401
Quote:
Originally Posted by Perfectlap
Well personally I would avoid spacers, but that's ony because I intend to track the car and attend some driving schools. Porsche naturally doesn't sign off on it.

Actually, you can get 5mm spacers from Porsche for the Boxster. The anniversary edition comes with spacers.


-

Lux is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 06:46 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page