What I want to see next is a youtube video of this monster on a track from all perspectives. Drive by's, in-car cam, and from the back from a standing start!

Great work. I sure wish I had a shop and the cash to do something with my boxster on a scale like this. It's really impressive work.

I do hope you'll offer Subaru conversions for customers at some point in the future.

http://i180.photobucket.com/albums/x...z/IMG_8549.jpg
http://i180.photobucket.com/albums/x...z/IMG_8553.jpg
http://i180.photobucket.com/albums/x...z/IMG_8558.jpg

Very impressive! The project has come a long way since its inception. Your fabrication skills are outstanding.
( the view from the rear reminds me of Barbara Streisand for some reason...)

Agreed :eek:

It's Mecha-Streisand!

Sweet mother of God!

Amazing work. I'm looking forward to your testing and ..... eventually your "street" version ideas. Hopefully they will be able to work with the topless nature of the Boxster.

Very nice work!
Can't wait for the final product!

I've been working on the final assembly lately. It's basically down to some fluid plumbing (accusump, oil coolers, scavange pump etc) and finishing up the chassis harness and then I should be able to try and fire the motor. The air jacks work though...

http://i180.photobucket.com/albums/x...z/IMG_8753.jpg

That is a art!

So the air jacks are built right into the subframe, huh?

That's slicker than snot on a doorknob. I had no idea they even existed!

I gotta put that down as a wish-list item for a future mod!!!

WOW.


Just........WOW.

No, the air-jack tubes are welded into the chassis itself.

oh my word. just wow!

*subscribed*

Amazing work. WOW. This gives me a idea for a 986 that needs an engine.

That is fantastic work !!! I wish i had your 'know how'.

interesting build here, curious if you have it running now? Audio clip?

Finishing up the wiring. Decided to build a new chassis harness from scratch to save weight and simplify things. I'll update with more pictures soon.

http://i180.photobucket.com/albums/x...z/IMG_9104.jpg
http://i180.photobucket.com/albums/x...z/IMG_9103.jpg

Wiring is DONE! Other than the ABS system, the chassis harness was built from scratch. The engine management is stock from the 2007 WRX donor and fit in the stock Boxster location using all stock mounting points. We were even able to use the stock Porsche ECU mounting studs with the stock Subaru ECU and relays. Everything powers up and the engine cranks. Still need to plumb the oil system, fuel system, and cooling system, but then we should be able to fire it up and get it on the dyno for some tuning.


Rear trunk

http://i180.photobucket.com/albums/x...z/IMG_9105.jpg
http://i180.photobucket.com/albums/x...z/IMG_9106.jpg
http://i180.photobucket.com/albums/x...z/IMG_9112.jpg

http://i180.photobucket.com/albums/x...z/IMG_9125.jpg
http://i180.photobucket.com/albums/x...z/IMG_9115.jpg

Accu Sump

http://i180.photobucket.com/albums/x...z/IMG_9118.jpg

http://i180.photobucket.com/albums/x...z/IMG_9119.jpg
http://i180.photobucket.com/albums/x...z/IMG_9120.jpg
http://i180.photobucket.com/albums/x...z/IMG_9124.jpg

FANTASTIC. Thanks for the update.

Where and how do you make them work? Do you use an external compressor to inflate them? Do you use a race jack to lift the back before you inflate them, or are they strong enough to lift the car from the ground on their own with enough compressed air?

Why this bit is fascinating to me is beyond me considering everything else you've done, but I'd love to know.

Hey, I'm with you, Randall. If this was something that could be employed on a stock car, I'd go for it. Could allow you to do certain things underneath without having to fully jack/lift the car...and it'd be kinda cool to show off, heheh...
:dance:

Dear Overdrive,
If you ever do anything under a car with only air jacks holding it up, I will personally come to Conn. and kick your ass and maybe bring flowers to your funeral. I've never been to the East Coast, don't give me a reason to do it.

:D:dance::D:dance:

You could come give me a hand with the safety stands...would that be a good reason? :p

It's good to know people care, Spinnaker. Alas, just jokes...but it would be kinda cool to have air jacks on the car...no worries about flat spots over the winter. :cheers:

You need to replace the shift mechanism with a 997 unit.

When I upgrade the shifter, it will be to a CMS unit with custom cables.

Even better.

clicky

Someone made a kinda good point about the price that can go along with a system like this in a forum thread link that popped up on kcpaz's search results above:

"for that price you can buy a lift for your garage"...true, it'd sure make tire changes a lot faster, though.

How much does that system weight, kcpaz (ballpark)?

wow!!! need i say more?!!!!

So when are you going to make a cradle, tranny adapter and clutch available for purchase???????? :)

Before the end of the year.

Thank you! I may be first in line.

What scares me the most is that one crash will destroy all your hard work and time invested. Everything you have shown us is top notch in every regard, just hate to think of it getting trashed by some boob on the track ....

Best of luck it's an impressive bit of kit.

J T

We are also using this car to test out a few non-conversion related products including a programmable brake light flasher module. With this module, we are able to set the brake lights to activate with an adjustable number of flashes prior to constant illumination, and adjust the flash frequency (faster flashing available with LED bulbs). This is something we are developing specifically for full size cars and is not just a retrofitted motorcycle flasher unit.

Race Car Brake Light Flasher - YouTube

Can we hear more non-limp mode engine running? :D Are things closer to being in proper running order for a legit running?

I had a Subie guy drooling at that first video, curious to see how it sounds all put together and ready to haul.

I'll put up a video of the dyno tuning. Probably another week or so.

Finally, all of the plumbing is finished, communication for the Racepak dash is finalized and programmed, and it's ready for a tune. More video coming soon...

http://i180.photobucket.com/albums/x...z/IMG_9745.jpg
http://i180.photobucket.com/albums/x...z/IMG_9748.jpg
http://i180.photobucket.com/albums/x...z/IMG_9754.jpg
http://i180.photobucket.com/albums/x...z/IMG_9758.jpg
http://i180.photobucket.com/albums/x...z/IMG_9761.jpg
http://i180.photobucket.com/albums/x...z/IMG_9762.jpg
http://i180.photobucket.com/albums/x...z/IMG_9770.jpg
http://i180.photobucket.com/albums/x...z/IMG_9769.jpg
http://i180.photobucket.com/albums/x...z/IMG_9774.jpg
http://i180.photobucket.com/albums/x...z/IMG_9781.jpg

I'm late to this build thread...but I have to reiterate what others have said, your fabrication skills, welding skills are phenomenal!!!!

As someone who built a boxster into a dedicated race-car with a 3.6L 996 motor I can't get over your thoughtfulness in locating every system so that it is serviceable. The detail work of the plumbing is fantastic.

You showed a close up of two stainless tanks, what are they? Engine Oil and Engine Coolant?

Just fantastic!