986 Forum - for Porsche Boxster & Cayman Owners

986 Forum - for Porsche Boxster & Cayman Owners (http://986forum.com/forums/)
-   Boxster General Discussions (http://986forum.com/forums/boxster-general-discussions/)
-   -   How to take power from the relay carrier (http://986forum.com/forums/boxster-general-discussions/22917-how-take-power-relay-carrier.html)

KevinH1990 11-29-2009 12:17 PM

How to take power from the relay carrier
I've searched for more information on this topic, but I think I'm missing some basic information. I have a 2000 base Boxster and I'm planning to install a Homelink device using these instructions that I found on Renntech:


Some of the instructions are also in this post: http://www.renntech.org/forums/index.php?showtopic=23307 because the author was installing foot well lighting and the Homelink at the same time.

I have assembled and tested the device, but before I start taking apart the car to install it, I need to make sure I understand how to tap into the power at the relay carrier above the driver's foot well.

I connected my power for the Homelink and the dimmer switch to (2) -- 999.650.320.22 -- connectors. The are for contacting the bridge/bridge plug in the relay carrier.

Based on some other posts, it seems like I am going to have to loosen the relay carrier to do this. Can anyone provide instructions or links to other posts that show how this is done? I need step-by-step basic instructions if possible.


All times are GMT -8. The time now is 08:31 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website