Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 02-15-2005, 05:57 AM   #1
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
here's some info on Klasse:
I have an unfinished bottle of virtually every single wax available at the auto stores. My friend who worked for Mercedez turned me on to Klasse which isn't sold at Auto Stores. All the results are similar for all of the products I've used but Klasse is by far the easiest to apply and remove. Its acrlyic so it doesn't require any waiting/hazing time. The minute it goes onto the paint it can be wiped off. Its a two part treatment: first use KLasse All in One which cleans the paint and fills in scratches applied with foam applicator. Klasse Sealant Glaze is next applied with a damp microfiber applicator. This sealant glaze is potent and you should only use about a drop per panel, if doesn't come of easily you've applied to much.
Let it cure for a day and then you can keep layering.

This layering is used on show cars and is fantastic on Black cars. Click on my signature and you can see what 17 coats looks like. Once you've finished layering it will look great. Some freaks like me like to put the icing on in the form of a Carnauab wax P21S or S100 are the most popular amongst the Auto Show deatailers. Its my opinion that you shouldn't ever apply a wax directly to a paint surface that hasn't first be treated to sealant barrier like Klasse SG. You can quick detail in between washes with a Carnauaba spray or Acrlyic Spray (Sonus makes both).
In between seasons its good to strip it all off with a wash of Klasse All In One, just drop a few squirts into a bucket of warm water and spray in some water for suds, after washing twice Clay the surface panels to remove sediments (very important) Add another layer of AIO and begin the sealant layering with Klasse Sealant Glaze once again.
And almost as important spend some money on quality microfiber towels. Not all microfiber towels are the same. The one's in your local auto store are only for the interior of the car. Professional detailers who have to wax frequently seem to be using waffle weave microfiber towels in grey and white colors.
www.autogeek.net
www.autopia-carcare.com
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW

Last edited by Perfectlap; 02-15-2005 at 06:10 AM.
Perfectlap is offline   Reply With Quote
Old 02-15-2005, 06:04 AM   #2
Registered User
 
Brucelee's Avatar
 
Join Date: Jun 2004
Location: Des Moines, IA
Posts: 8,083
Thumbs up

Klasse All in One and Sealer are the best products I have ever used. Even on black, these can create miracles.
Brucelee is offline   Reply With Quote
Old 02-15-2005, 06:08 AM   #3
Registered User
 
Brucelee's Avatar
 
Join Date: Jun 2004
Location: Des Moines, IA
Posts: 8,083
Talking

A clay bar is essential IF the finish has surface pollutants within it. You can tell this as you rub your hand across a clean surface. If will feel like there are bumps in it even though the finish is clean, then you need to clay bar.

The clay bar actually draws or pulls out the pollution from the paint into the bar. It is kind of wierd, you get all this crap on the bar that you could not see, but could feel, in the paint.

The essential first step (after washing) to a pristine finish.

After that, well it depends on what you are dealing with.
Brucelee is offline   Reply With Quote
Old 02-15-2005, 06:17 AM   #4
Registered User
 
Join Date: Dec 2004
Location: Frederick, Maryland
Posts: 117
What about paint chips? I recently got an 2001 orient red and the previous owner decided to repair a paint chip and (my opinion) did a poor job. How do guys recommend getting his repair up so I can try to repair it with an Autosharp pen?
spgribben007 is offline   Reply With Quote
Old 02-15-2005, 06:50 AM   #5
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
take a qtip with a tiny drop of nail polish remover and see if the touch up paint he used wasn't followed up with a clear coat. If he did a poor job I'm sure he didn't use a two part touch up paint and the acetone should lift the paint out of the chip hole. Then get out some pencils
here's the professional method
http://www.bettercarcare.com/articles.php?articleId=27
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW

Last edited by Perfectlap; 02-15-2005 at 06:52 AM.
Perfectlap is offline   Reply With Quote
Old 02-15-2005, 01:29 PM   #6
Crazed P-Car enthusiast
 
Join Date: Sep 2004
Location: Toronto, Canada
Posts: 150
Should you not use a paint cleaner or pre-wax first if you're gonna use a sealant next? Then wax?
__________________
What's behind me does not matter.
IceBox is offline   Reply With Quote
Old 02-15-2005, 02:01 PM   #7
Registered User
 
Perfectlap's Avatar
 
Join Date: Nov 2004
Location: New Jersey
Posts: 8,709
it depends on the age of the paint. If its a newer car that is garage kept a paint cleaner might be overkill. And remember you only want to rub on the paint a little as necessary year round. People forget how soft the German clear coats are. They are actually banned here in the USA because of their chemicals. So if you have your car repaired by a Body Shop they are not using the same materials. The base coat might be the same.

If the car is kept outside and is a few years old you should use a paint cleaner like P21S or 1Z (looks like a speedstick deodarant).
Don't know about other brands but you can't use Klasse Sealant Glaze without first using their cleaner/polish: Klasse All in One. They are formulated to bond together or something.
Many people use Meguiar's ScratchX before proceeding to the cleaner and sealant. Works well but requires lots of elbow grease. (speed, never pressure).
A great job for the Porter Cable orbital polisher.
__________________
GT3 Recaro Seats - Boxster Red
GT3 Aero / Carrera 18" 5 spoke / Potenza RE-11
Fabspeed Headers & Noise Maker
BORN: March 2000 - FINLAND
IMS#1 REPLACED: April 2010 - NEW JERSEY -- LNE DUAL ROW
Perfectlap is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 11:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page