New M535
Hi
New to sight and to Porsche . My 1997 Boxster had the flood in back seat and of course the M535 was wasted. Will the car start with the new M535 instailed? Thanks Mitch |
Sooooo.....in referencing M535, it looks like you are talking about your alarm system computer that got fried.
You may need a new key to go with it. http://www.pelicanparts.com/cgi-bin/smart/more_info.cgi?pn=996-618-260-07-M100&catalog_description=Alarm%20Control%20unit%20 NOTE%3A%20Only%20for%20cars%20with%20M%35%33%35%20 Anti%2Dtheft%20Lock%20%28%33%31%35mhz%29%20NOTE%3A %20Requires%20Program%20Update%20after%20Installat ion%2C%20Boxster%2FBoxster%20S%20%28%31%39%39%39%2 D%30%30%29 |
new key to match M535
Hi just looking to get it started to get it to the dealer for reprograming. Not concerned if the key remote will open doors .
|
You cannot simply install a new Alarm module and start the car w/o programming it first.
You're either going to have to get your car to the dealer (or an independent), or get them to come to you (good luck with that). :cheers: |
Found a Independent
Hi
Found a Independent who can program my M535 control unit. Had it towed their and the Porsche dealer will not give him the number to program it. I call the Dealer Gaudin Porsche where I purchased the M535 from and they also say they do not give out the code number. Were do I go now. thanks Mitch |
On a side note, to prevent this from reoccuring; make sure that they locate the water source. I suggest that you vacuum bag seal the M535 module before replacing under the driver's seat to prevent the unit from getting wet. Also, have they tried opening, and drying the old unit before replacing?? Some M535 unit can be salvaged using a hair dryer (depending on the extent of the water damage).
|
Thanks spine 911
Thanks
Tried to dry out but did not work . It had to be replaced . I bought the part as I said from a dealer and when to a independent to program. No good cant get code from a dealer. I called and file a complaint with Porsche of north America and they promised to get back to me with in 48 hrs. I guess I will see? |
Quote:
Sorry to read about your plight, sometimes you have to "eat it" and let the dealer do the repair, (which is why my car has only one key). I doubt Porsche NA will be sensitive to the situation, you'll have to let us know. If you get rung out at the dealer, just do the other repairs you are capable of and the savings will work out over time |
m535 problem
Porsche of north America did get back to me they said it was up to the dealer to give me a code sheet. I went to Jack Daniels Porsche in Fairlawn NJ . The were very helpful and after a 15 minutes inquire( along with title) to make sure I was the true owner They gave me the codes. Very Friendly and helpful.
|
Got codes and new M535
Got the codes and a new m535 but the after market shop, Eruotek in South hackensack still can not get it programed. Waiting to hear from them .
Mitch PS this may become a doner car. |
Unfortunately, not all shops can perform the M535 programming. Your last course of action would be to take it to the Porsche dealer for programming.
Goodluck! :cheers: |
Hey my old buddies...
Jack Daniels in NJ. Bought my Audi A6 Quattro from them - so I saw quite a lot of the service dept.
|
All times are GMT -8. The time now is 05:00 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website